Noticias e Investigación

arXiv:2609.25631v1 Announce Type: new Abstract: Dynamic object manipulation is essential for robots operating in real-world environments, yet methods for generating high-quality demonstrations remain limited. Methods designed for static tasks do not readily transfer to dynamic settings. Among dynamic demonstration generators, planning-based methods can fail near contact, while DOMINO-style replay simplifies dynamic interactions and may limit the experience available for policy learning. We present DynaForge, a planning-guided framework that learns residual corrections for dynamic manipulation demonstration generation. DynaForge combines low-frequency global planning with high-frequency object-centric inverse kinematics across task phases, and applies a residual policy to correct actions during dynamic interaction. An implicit curriculum groups rollouts under matched conditions and selects mixed-success groups, focusing residual reinforcement learning on the evolving competence frontier

arXiv:2609.25630v1 Announce Type: new Abstract: Real-world reinforcement learning (RL) systems still struggle with the demands of contact-rich industrial manipulation, including micrometer-level precision, success rates above 99%, and human-level cycle times. Although off-policy algorithms can improve performance by leveraging demonstrations and interventions, a key bottleneck is the lack of an intuitive interface for collecting such guidance while complying with constraints of the physical system and the policy. We propose PAKT, a framework for kinesthetic teaching in RL. As opposed to teleoperation approaches, PAKT relies on kinesthetic guidance, which is widely used in industry. However, a critical weakness of kinesthetic guidance is the possibility for the operator to move the robot along trajectories (e.g., velocities, accelerations, jerk) that the robot and/or policy cannot physically reproduce. Using PAKT, operators guide the robot through admittance control, which maps human-ap

arXiv:2609.25627v1 Announce Type: new Abstract: General-purpose robot control requires models to understand task intent, identify where to interact, capture how the scene evolves, and generate precise actions. Vision-language-action models provide strong semantic priors but typically do not explicitly model scene dynamics, while world-action models couple visual prediction with control without necessarily exposing the task-relevant semantic and spatial structure needed for fine-grained manipulation. We present MachEmbodied-U0 (ME-U0), a unified embodied foundation model connecting understanding and generation experts through a Mixture-of-Transformers architecture. Subtask prediction and affordance grounding guide joint visual-dynamics and action generation via flow matching. Visual dynamics encompass future RGB, depth, surface normals, and optical flow, providing complementary supervision for appearance, geometry, and motion. Multi-rate Rotary Position Encoding (MRPE) aligns visual dyn

arXiv:2609.25625v1 Announce Type: new Abstract: Most minimally invasive surgery is still performed with hand-held laparoscopic instruments, and the surgeon's instrument kinematics are lost when the operation ends; only the endoscope video is kept. This paper presents an end-to-end pipeline that captures this motion in the operating room and uses it to train a surgical robot policy, validated on live animals. We introduce a surgical instrument-state logger that mounts on the shaft of a standard laparoscopic instrument and recovers its pose and jaw state from an inertial sensor, a time-of-flight sensor and a Hall sensor, with no external camera or tracker. A data pipeline measures the latency of every sensor channel against a robot ground truth and aligns the channels before forming observation-action pairs. On these demonstrations we train a diffusion policy with a fine-tuned DINOv3 backbone, selecting its design by closed-loop rollouts in a physics simulator reconstructed from depth ma

arXiv:2609.25619v1 Announce Type: new Abstract: This work investigates how to enable general multi-finger robotic hands to perform the complete tool manipulation process, which entails picking up a tool, loading it into a suitable pose, and then wielding it. Inspired by human tool manipulation and mechanical design principles, we model the hand and the tool as a unified hand-object mechanism (HOM) composed of sub-assemblies. Specifically, we define a HOM as consisting of the hand, the object, and the generalized contact frames, allowing the HOM's motions to be expressed with the same set of Cartesian-space relative contact velocities, irrespective of the hand's kinematics and geometry. Then, we define a HOM's sub-assemblies as relative contact velocity and contact force constraints between fingers. Building on these definitions, we developed a lightweight and physically interpretable motion planning and contact estimation framework using least squares and a complementary filter. We eva

arXiv:2609.25614v1 Announce Type: new Abstract: This article presents a bimanual teleoperation pipeline and conceptual design of a deployable four-finger payload for intra-vehicular free-flyers. Future habitats in low-Earth orbit (LEO) will require systems to perform mundane tasks like cargo handling and maintenance during crewed and uncrewed periods. The gripper payload provides 17 manipulation degrees-of-freedom (DoF) through four independently actuated fingers on a linear rail system. To control it, a virtual reality (VR) device interface maps the human ground operator's hand motions to the finger pairs, their separation to the rail, and common wrist motion to Astrobee translation. We present the preliminary results of teleoperating Astrobee in a custom zero-gravity MuJoCo-based International Space Station (ISS) simulator through ten repeated trials of transporting a rigid ISS Cargo Transfer Bag (CTB). We measure task success, continuous contact retention, completion time, and cargo

arXiv:2609.25606v1 Announce Type: new Abstract: Cable routing requires coordinated control of global cable topology and changing local contacts. We present CableVLA, an end-to-end multimodal vision-language-action framework that converts simulation-privileged supervision into deployable cable-topology and tactile representations. TopoHead distills node-level physics and current and future cable-topology information into causal visual context for the action expert. TacSense uses complementary frame and taxel branches to learn contact dynamics from resistive arrays, with simulator-derived kinematics and contact events providing supervision beyond the measured force map. A contact gate activates force-tactile residuals that refine the next 8 arm-and-gripper actions of a frozen topology-conditioned policy. Across 345 MuJoCo evaluations, CableVLA improves success from 62.6% for the $\pi_{0.5}$-V visual baseline to 84.9%. TacSense achieves pronounced gains in slip-transition recognition over

arXiv:2609.25577v1 Announce Type: new Abstract: Most minimally invasive procedures are still performed with hand-held laparoscopic instruments, yet only the endoscopic video is retained; the instrument motion that expresses surgical skill, and that could support skill assessment and robot learning, is lost. Pose from video alone remains millimeters to centimeters off, and an instrument-mounted inertial measurement unit (IMU) cannot rely on its magnetometer, whose field changed with tool pose and between sessions in our measurements. We present a surgical instrument-state logger that clips onto a conventional instrument without modifying the part that enters the patient and fuses a six-axis IMU and a time-of-flight (ToF) rangefinder with a markerless camera in an error-state Kalman filter under the remote center of motion (RCM) of the trocar. Heading comes from the shaft silhouette, segmented by a U-Net, in place of the magnetometer: the rotation-angle error is 0.200{\deg}, against 3.58

arXiv:2609.25562v1 Announce Type: new Abstract: Open robot policies increasingly follow two paradigms: vision-language-action models (VLAs) directly map observations and instructions to actions, whereas world-action models (WAMs) incorporate learned video or world dynamics into policy learning or action generation. Although both target the same manipulation tasks and represent alternative design choices, they are commonly reported under different evaluation protocols, leaving their capability, robustness, language sensitivity, and deployment-cost trade-offs unclear. We present IndustrialVLA-Bench, an evidence-aware evaluation of six released VLA and WAM systems under a unified reporting schema. It separately evaluates clean capability on LIBERO, non-language robustness on LIBERO-Plus, instruction sensitivity on LIBERO-Para, and observed execution cost. Reported task scores aggregate three complete evaluations with distinct random seeds under a fixed checkpoint and inference configurati

arXiv:2609.25558v1 Announce Type: new Abstract: Vision-language-action policies benefit from geometric supervision, but current-frame geometry alone does not explicitly describe the changes associated with manipulation. This design is motivated by the goal of learning an embodiment-agnostic visual interface that can be pretrained across robot and egocentric video before robot-specific action alignment. We introduce Geometry-Change VLA (GC-VLA), which learns to predict multiview future-current geometry-change tokens from current observations. Offline frame pairs define a nominal 0.5-second prediction horizon; future observations are used only to construct training targets. Stage 1 trains a geometry-change vision-language model (GC-VLM). Stage 2 introduces a continuous ActionExpert and aligns it with robot actions while stopping action-flow gradients at the VLM interface. Stage 3 enables these gradients to update the trainable VLM components jointly with the ActionExpert. Stage 4 freezes

arXiv:2609.25527v1 Announce Type: new Abstract: Current robot-assisted minimally-invasive surgery (RMIS) platforms provide a fixed console for the surgeon to view stereo endoscopic images and teleoperate instruments inside the patient. Several researchers have proposed the use of a head-mounted display (HMD) as a portable console, with video pass-through rendering of the endoscope images which, like the fixed console, restricts the operator to a single endoscopic viewpoint and limits depth perception. We present a digital twin-driven virtual reality (VR) teleoperation platform, where the digital twin is created from markerless perception of the surgical environment and streamed for display on the HMD. This overcomes the limitations of video pass-through by providing multi-view rendering and natural motion-parallax cues, enabling decoupling of the user's hand posture from strict instrument alignment. The system utilizes VR hand controllers to increase the teleoperation workspace and to

arXiv:2609.25511v1 Announce Type: new Abstract: Vision-based gesture control accepts commands from any hand in the camera field of view, which is unsafe in shared indoor spaces. This paper presents IGate, an identity-gated control stack that includes gesture control and face tracking, in which commands are admitted only when an enrolled operator is verified. The system performs few-shot user enrolment from 20 initial face frames, without prior user-specific training: verification compares an embedding of the current face crop against the enrolled template by cosine similarity, while face tracking uses proportional correction. Gesture control is achieved by classifying extracted hand landmarks using an RBF-SVM trained on a custom dataset. Additionally, a hierarchical finite-state machine handles mode selection, default, and fallback behaviours. The approach is tested on a DJI Tello EDU, each component evaluated offline and in-flight across 270 trials (149 flown). Face verification yield

arXiv:2609.25506v1 Announce Type: new Abstract: Robot manipulation policies must generalize across visual shifts while preserving scene context relevant to action. General-purpose vision encoders are not tailored to visuomotor control, while object-centric approaches often use segmentation masks as hard filters that discard potentially useful context. We propose RoboMP-DINOv2 (Robotics Mask-Prompted DINOv2), a full-scene vision encoder that treats masks as spatial prompts rather than visibility filters. It extracts dense DINOv2 features from the full observation, injects learned region-specific embeddings at masked locations, and jointly contextualizes prompted and unprompted tokens for action prediction. We further introduce masked-region color randomization (MCR) to improve appearance robustness, yielding RoboMP-DINOv2-MCR. Across seven simulated manipulation settings, RoboMP-DINOv2 achieves 60.7% success under spatial shifts and 59.7% under scene clutter, compared with 50.7% and 41.

arXiv:2609.25486v1 Announce Type: new Abstract: Forceful manipulation is challenging for humanoid robots because interaction forces can disturb whole-body balance. We introduce the Supporting Hand Strategy (SHS), which enables a humanoid to brace against the environment with one hand while performing forceful manipulation with the other. SHS optimises a task-conditioned support configuration that guides two synchronous reinforcement-learning policies, without human motion data or online whole-body trajectory planning. On a Unitree G1, SHS achieved usable contact forces up to 60 N, compared with a maximum sustained force of 13.5 N without environmental bracing, while substantially improving force tracking over a task-independent support configuration. The same policies generalised to different task regions without retraining. SHS therefore provides a simple mechanism for substantially extending humanoid forceful-manipulation capability.

arXiv:2609.25450v1 Announce Type: new Abstract: Depth-conditioned locomotion policies have demonstrated impressive agile maneuvers, but can be steered to unpredictable actions when observations are outside their training distribution. Occlusion, invalid returns, sensor noise, and visual distractors can shift deployment observations away from nominal simulated depth. While synthetic sensor augmentation targets specified degradations, it does not by itself define behavior under corruption families omitted from training. To address gaps in training-time coverage, we present REDACT (Retaining Evidence Despite Artifacts for Continued Traversal), a teacher-student framework combining an improved visual encoder architecture, persistent feature masking, and a novel consensus-gating algorithm to retain useful depth information under unmodeled corruption. The gate uses approximate conformal calibration on clean observations alone, requiring no prior knowledge of the corruption type. Trained on c