Noticias e Investigación

arXiv:2611.03498v1 Announce Type: new Abstract: Navigating crowded urban environments requires robots to avoid pedestrians while adhering to social norms such as remaining on sidewalks. Existing approaches typically address either crowd avoidance or semantic path planning in isolation. We propose a reinforcement learning (RL) navigation policy that jointly reasons about semantic terrain and dynamic obstacles from a single semantically annotated bird's-eye-view (BEV) map, without relying on explicit human-state estimation. Our policy outperforms established crowd-navigation and semantic-aware baselines and transfers zero-shot to a legged robot, demonstrating socially compliant navigation in highly dynamic real-world scenarios.

arXiv:2611.03489v1 Announce Type: new Abstract: Pre-touch sensing, or sensing information about an object before contact, is an attractive modality for robot hands as it can allow a robot to anticipate and respond to a contact before it happens. In this work, we introduce ToFTouch, a multimodal tactile sensor combining three multizone (4$\times$4 resolution) time-of-flight sensors with an optics-based pressure sensing array. We mount this sensor on a parallel jaw gripper and demonstrate its utility on three distinct tasks: (i) pre-grasp adjustment, (ii) item extraction from clutter, and (iii) item insertion into tight spaces. For pre-grasp adjustment, ToF feedback reduced cycle time by 7.4$\%$ by enabling anticipatory gripper closure during approach. For extraction, ToF sensing enabled successful retrieval across all tested depth offsets ($\pm$2 cm) deviating from the nominal pick point, including conditions where baseline approaches failed, with standard deviations below 0.4 cm. For i

arXiv:2611.03446v1 Announce Type: new Abstract: Mechanical thrombectomy (MT) is an effective treatment for acute ischemic stroke, yet access remains limited by the availability of neurointerventional expertise. Telerobotic and AI-assisted systems may help address this challenge, but it remains unclear how clinicians interact with different levels of autonomy and how autonomous navigation systems perform in realistic environments. This work introduces Copilot Assistance Modes (CAMs), a framework for clinician-AI collaboration in robotic endovascular navigation spanning the autonomy spectrum from manual operation to full autonomy. In the first in-vitro user study comparing clinician-AI collaboration strategies, 11 experts and two students evaluated six navigation modes in a patient-specific vascular phantom. Objective performance metrics were combined with subjective assessments, including workload and usability. Autonomous performance was additionally evaluated both in silico and in vit

arXiv:2611.03428v1 Announce Type: new Abstract: A robot that acts around people needs a world model of the human: a belief over the person's body state and a dynamics model that predicts where that state goes next. This abstract argues that two published components form exactly these two halves, and specifies how to couple them. KNOWN [1] reconstructs the 3D human body while estimating both aleatoric and epistemic uncertainty in real time (11.6 ms per frame); its aleatoric term identifies unreliable observations, its epistemic term identifies inputs from low-density regions of the training data, and refinement driven by the epistemic term reduces the error on such inputs from 81.3 to 70.3 mm. PhysMoP [2] predicts future body configuration by solving the Euler-Lagrange equations of the body with learned dynamics terms, reducing the 80 ms prediction error from 9.6 to 2.1 mm on Human3.6M and from 12.1 to 0.7 mm on 3DPW. We define the interface between the two, propose three mechanisms by

arXiv:2611.03418v1 Announce Type: new Abstract: Myoelectric Control Systems (MCSs) enable voluntary control of wearable robots through muscle activity. However, intention decoding, assistance shaping, and low-level actuator control are often not explicitly distinguished, making their contributions difficult to evaluate and compare. This review introduces a functional decoder-shaper-controller framework for continuous myoelectric control of upper-limb exoskeletons. The decoder estimates an intention-related variable from surface electromyography (sEMG), the shaper maps it to a control reference according to an assistance policy, and the controller realizes that reference through actuator control. This decomposition separates intention estimation from assistance-policy design and enables comparison of heterogeneous architectures. Representative approaches are critically examined in terms of module design, calibration, and evaluation. The analysis highlights that the shaper, despite deter

arXiv:2611.03410v1 Announce Type: new Abstract: Wearable robot interfaces must connect user input to timely physical action. We present the proposed platform, an open smart-ring platform for studying this connection across task stages. The ring integrates a microphone, an inertial measurement unit, photoplethysmography, and skin-temperature sensing. Its software architecture separates acquisition, event interpretation, interaction policy, and robot execution. We characterize seven operating modes and evaluate speech and gesture control with 10 participants. Across five commands and 250 trials per modality, speech and gestures achieved task success rates of 90.4% and 88.8%, respectively. Recognition accuracy exceeded task success for both modalities. Gaussian hidden Markov models achieved higher accuracy than a support vector machine across three vocabulary sizes, with longer scoring times. Following a shared spoken task start, gesture-based adjustments had shorter median response times

arXiv:2611.03307v1 Announce Type: new Abstract: Ball-balancing robots (ballbots) must lean to accelerate, and the lean is limited by the wheel torques and by safety. Planners that use the full robot model are expensive, while planners that ignore the balance dynamics produce references that cannot be followed. This paper presents a two-layer navigation scheme for a three-omni-wheel ballbot. The upper layer is a model predictive controller on a \emph{jerk model} of the ball position, with discrete-time control barrier functions for static, moving, rotating and concave obstacles. The lower layer is a hierarchical sliding mode controller with an extended state observer and a robust exponential control barrier function on the tilt (HSMC-ESO-ECBF). The layers are linked by an acceleration bound derived in closed form from the largest steady tilt that the barrier function admits, so that the plan never asks for a lean the tracker refuses. For obstacles whose motion is only predicted, the obs

arXiv:2611.03294v1 Announce Type: new Abstract: Contact-rich manipulation requires fine-grained control and complex physical interactions with the environment, posing significant challenges for robot policy learning. Vision-only policies struggle with such tasks, as contact states and interaction forces are difficult to infer from visual observations alone. Existing methods mitigate this issue by incorporating force or tactile sensing. However, they often treat these signals as auxiliary observations without fully exploiting their role in modeling future interaction dynamics. To address this, we propose ForceLDM, a force-aware latent dynamics model that learns future contact and motion dynamics to guide action generation. Rather than directly predicting future observations, which can entangle task-relevant dynamics with irrelevant sensory details, ForceLDM learns a compact representation of future dynamics through knowledge distillation. Specifically, a teacher network with privileged

arXiv:2611.03268v1 Announce Type: new Abstract: Many manipulation goals are easier to visualize than to specify numerically through explicit geometric constraints. We present VerifLM, a framework that converts image-edited goal configurations into physically verified 6-DoF object poses for planning. Using an edited image, VerifLM recovers an initial relative pose between an active object and a passive object, then prompts a vision-language model to generate axis-wise sampling constraints and a task-specific validation program. Candidate poses are evaluated in a physics simulator, and the VLM selects the most task-consistent retained candidate. To operate without predefined object meshes or physical parameters, VerifLM reconstructs metric object geometry from RGB-D observations and constructs multiple hypothetical simulations with varying physics and geometry. Parallel-world validation evaluates candidates across geometry--physics variations and ranks them by the number of worlds in whi

arXiv:2611.03254v1 Announce Type: new Abstract: Virtual reality experiments involving navigation and simulated robot motion often require large, realistic environments and numerous distinct trajectories to avoid repetitive navigation while providing sufficient variation for controlled experiments. Designing such scenarios manually is labor-intensive, particularly when trajectories must satisfy predefined geometric and kinematic constraints while remaining diverse and comparable across experimental conditions. This paper presents TRAILS, an automated framework for generating complete virtual navigation scenarios consisting of an environment layout, a path, and a time-parameterized motion profile. The framework combines a constraint-based procedural environment generator inspired by Wave Function Collapse, trajectory generation using optimized cubic B\'ezier curves, and speed-profile generation subject to kinematic constraints. The generated scenarios provide diverse indoor environments

arXiv:2611.03216v1 Announce Type: new Abstract: Soft robot co-design methods can jointly optimise morphology and control, but the resulting designs are often difficult to manufacture, while manufacturable approaches typically restrict actuator placement or require manual assembly. We present a simulation-based co-design framework that jointly optimises material distribution, pneumatic actuator placement and orientation, and control, while producing designs that can be fabricated monolithically using fused deposition modelling. The framework uses a differentiable 2D plane-stress Material Point Method simulator, incorporating an experimentally validated material model and an empirically derived surrogate model of a 3D-printed inflatable actuator. We demonstrate gradient-based optimisation soft robotic arms for prescribed tip trajectories. Optimised designs are transferred directly from simulation to one-shot monolithic FDM fabrication, with integrated actuators and no post-assembly. Phys

arXiv:2611.03168v1 Announce Type: new Abstract: We release all 3,718 episodes from the ArmnetBench v0.1 evaluation (arXiv:2607.24481), which contains 600 teleoperated demonstrations and 3,118 rollouts of seven imitation-learning and vision-language-action policies on 12 tabletop tasks, recorded on low-cost SO-101 arms; 73% of the rollouts are failures. Every policy for a task was trained or fine-tuned on the same 50 demonstrations and rolled out on the same cell, so the corpus contains many policies' failures on shared tasks. An operator labelled every rollout successful, suboptimal or failure. Each episode has three camera views, joint states and actions and is available on the Hugging Face Hub in LeRobot v3.0 and a reward-model format. This note documents how the episodes were collected and the limitations that could affect their use.

arXiv:2611.03163v1 Announce Type: new Abstract: Fine-grained manipulation couples instruction grounding, local visual precision, and sustained execution. We present FineCraft, a framework that adapts pretrained models for fine-grained manipulation in the MetaFine Challenge. A task-routed mixture of policies selects independently adapted DINOv2-DiT or pretrained $\pi_{0.5}$ policies through a common observation-action interface. Local visual features help identify the instructed object parts, demonstrations and expert continuations teach the required actions, and new observations guide replanning during execution. FineCraft ranks fourth with an overall score of $0.878$, exceeding the published reference on all five tasks. Official results and local diagnostics characterize performance across visual perturbations, instruction changes, and multi-stage manipulation. Code is available at https://github.com/eqcy/FineCraft

arXiv:2611.03138v1 Announce Type: new Abstract: Progress in robot learning, particularly physical multi-agent reinforcement learning (MARL), is currently challenged by a limited availability of accessible, standardized benchmarks. While simulation-based MARL has produced remarkable emergent behaviors, from coordinated team play to complex tool use, translating these advances to physical systems remains difficult. A key barrier is infrastructural: physical platforms are often prohibitively expensive, require specialized facilities, or lack open mechanisms and designs for reproducibility. We introduce KlaskTron, an open-source, low-cost (<\$2500 USD), desktop-scale robotic testbed for adversarial MARL based on the dynamic tabletop game KLASK. The platform features dual CoreXY gantries with high-torque brushless motors, enabling the high-speed, precise manipulation required for competitive play. Crucially, we provide a complete ecosystem: hardware designs (CAD, BOM), a GPU-native digital

arXiv:2611.03106v1 Announce Type: new Abstract: Field robots operating in mines, tunnels, and disaster areas require reliable localization despite GNSS denial and degraded camera and LiDAR measurements caused by dust, smoke, or poor illumination. Missions involving both ground and aerial robots further motivate complementary sensing modalities that do not depend on visibility, preinstalled infrastructure, or wheel contact. This letter presents MISLAM, a tightly coupled magnetic-inertial simultaneous localization and mapping system using an IMU and a nine-magnetometer array, without relying on external odometry or platform-specific motion assumptions. The system combines the inertial navigation model with local polynomial magnetic-field models for short-term motion estimation and a global Gaussian process model for drift correction using an error-state Kalman filter. Offline evaluation on three indoor datasets collected with a handheld rig shows reductions in total endpoint closure erro