뉴스 및 연구

arXiv:2608.27151v1 Announce Type: new Abstract: Stable support remains challenging in robotic disassembly of irregularly shaped products. As components are progressively removed, the available support surfaces, mass distribution, and task loads change throughout the process. A fixture layout designed for one workpiece state may therefore become infeasible at later stages, motivating unified support planning over the complete disassembly sequence. This paper presents a modular vacuum-based fixturing system that plans one shared support configuration for the complete disassembly sequence of a screwdriver or shaver, allowing each sequence to proceed without fixture reconfiguration. To search the mixed continuous--discrete layout space under repeated cross-stage evaluation, a denoising diffusion probabilistic model generates physics-informed initial configurations that are refined through Bayesian optimization. Robotic screw and component-removal experiments verified the disassembly feasib

arXiv:2608.27088v1 Announce Type: new Abstract: While most phenotyping platforms rely primarily on image-based measurements, advanced plant characterization requires the integration of active physiological sensing modali- ties such as chlorophyll fluorescence. We present an autonomous robotic platform designed to perform targeted fluorescence measurements on plant leaves. The system combines 3D plant reconstruction, geometric analysis, and motion planning to localize suitable measurement points and generate collision-free trajectories for a robotic manipulator. A dense 3D model of the plant is reconstructed from multi-view data and used to extract candidate leaf surfaces based on orientation, accessibility, and sensing constraints. These targets are then integrated into a task-level planning framework that guides the end-effector to precise contact or near-contact configurations required for point-based fluorescence acquisition. The platform enables automated, repeatable, and spatially

arXiv:2608.27085v1 Announce Type: new Abstract: We study the problem of decentralized, self-organized task sharing for a swarm of heterogeneous robots that collaborate in transportation or other objectives that require coordinated motion planning. To this end, we present theoretical and practical results for the simple but effective mechanism of \emph{bucket brigades} for load balancing, in which a team of heterogenous robots share a spatial task in a confined, one-dimensional space, while only being able to sense collisions with neighbors or walls. The goal is to optimize throughput of the overall system, without central control or information, aiming at an interval partition proportional to robot velocities. We address possible chaotic system behavior by developing a stabilization mechanism based on simple local aid, a ``token'', that temporarily decelerates robots after an encounter. This purely local change eliminates persistent oscillations, resulting in convergence towards a stab

arXiv:2608.27079v1 Announce Type: new Abstract: Pretrained vision-language-action (VLA) policies provide strong priors for robot manipulation, yet adapting them online to fine-grained biomedical tasks remains challenging. Task success often hinges on subtle, view-dependent visual cues, while task-level rewards provide little guidance about which regions matter, making it difficult to learn task-relevant visual grounding from limited real-robot interaction. Online adaptation is further constrained by the computational cost of VLA inference and replay-based updates. We introduce GRAFT (Grounded Reinforcement Adaptation for Fast Task Learning), a framework for efficient online VLA adaptation through grounded perception. GRAFT uses region-level supervision to learn view-specific visual anchors that focus perception on task-relevant local cues without requiring region proposals at deployment. It further combines single-step action generation with cached visual-language prefix reuse to accel

arXiv:2608.27033v1 Announce Type: new Abstract: We introduce Riemann-1.0, a fully causal autoregressive World Action Model for embodied intelligence. Riemann-1.0 jointly models multi-view visual observations, robot states, and embodiment-specific actions within a unified causal autoregressive sequence, representing robot actions and world evolution as causal state transitions. Unlike existing WAMs based on joint generation, video-first prediction, or decoupled modeling paradigms, Riemann-1.0 unifies online robot policy execution and action-conditioned world simulation within a single model, enabling it to function as both an executable robot policy and a multi-embodiment visual world simulator. To scale embodied experience across heterogeneous data sources, we further develop a progressive embodied pretraining framework that unifies learning from egocentric human videos, handheld-gripper demonstrations, and heterogeneous robot trajectories under a shared World Action Modeling objective

arXiv:2608.26932v1 Announce Type: new Abstract: Accurate state estimation for autonomous underwater vehicles performing close-range seafloor sampling remains challenging. In low-altitude operation, down-looking cameras over featureless planar seabeds produce scale ambiguity, lateral degeneracy, and inconsistent feature tracking. Meanwhile, inertial-Doppler Velocity Log (DVL) fusion alone provides no mechanism for structural drift correction. We propose a Contact-Aided Factor-Graph Localization framework that treats physical interaction as an informative geometric constraint within a smoothing-based localization formulation. The method tightly fuses suction-based manipulator contact events with adaptive visual odometry, learned object detections, and on-board sensors. Visual odometry relative-pose factors and landmark bearing-range factors are uncertainty-scaled according to inlier statistics to prevent visually weak frames from destabilizing the estimator, while contact events are mode

arXiv:2608.26888v1 Announce Type: new Abstract: Many recent underwater simulators emphasize visual realism at the expense of physical fidelity, focusing on shallow-water effects with limited relevance in deep-water environments and high computational cost. In this work, we shift the focus toward deep-sea physical and sensor realism. We present a physics- and sensor-grounded extension of the Stonefish simulator that augments its hydrodynamic models with stochastic IMU and DVL drift, magnetometer disturbances, higher-order hydrodynamics, terramechanics, pressure-driven environmental variability, and physically based underwater optics. These additions are designed to better capture the forces and measurements shaping the behavior of deep-ocean AUVs, ROVs, landers, ASVs, and gliders, while remaining compatible with real-time simulation. This work advances underwater simulation toward more representative deep-sea operating conditions, which is particularly relevant for long-duration navigat

arXiv:2608.26883v1 Announce Type: new Abstract: Robotic grippers face substantial challenges in grasping and manipulating thin objects. Most existing grippers rely on highly precise approach and grasp motions, which limits robustness and reduces applicability. This paper explores thin-object grasping using books as a representative example. Here, we propose a novel solution that integrates an active surface with underactuated compliance to achieve stable grasping of thin objects without complex control. First, an underactuated gripper with an active surface is designed. The active-surface thumb performs in-hand repositioning of the target book without requiring adjustments of the robot arm or the other fingers, while the underactuated fingers establish compliant contact conditions with the environment, and the reconfigurable structure enables reliable grasping of books under different configurations. Second, we establish a kinematic model of the gripper, and determine the initial grasp

arXiv:2608.26821v1 Announce Type: new Abstract: Vision-language-action (VLA) models leverage pretrained vision-language representations for robot control, yet simply adding historical frames does not reliably capture recent physical change. This is especially problematic in multi-stage manipulation, where visually similar states may require different actions depending on prior execution. To address this challenge, we present TemporalFlow-VLA, which learns compact execution history through physically grounded temporal supervision. Using recorded robot states, robot geometry, and calibrated cameras, we construct robot-surface temporal flow as a training-only target and supervise two execution-aligned temporal queries that provide structured history to the action expert. The geometric supervision path is not evaluated at deployment. TemporalFlow-VLA achieves 97.63 +/- 0.26% average success on LIBERO, including 96.60 +/- 0.87% on LIBERO Long, and 85.5%/84.2% Clean/Randomized success across

arXiv:2608.26800v1 Announce Type: new Abstract: We present an online learning framework that enables a bimanual robot to acquire diverse juggling patterns directly on physical hardware within minutes, even with a significant sim2real gap. One of the most important lessons from this work is that a model, even when far from reality, can be extremely useful for learning. This motivates a central philosophy of our approach: learning should build upon the robot's current knowledge rather than replace it. Our regularized memory-based learning puts this principle into practice by learning a local model from accumulated experience while retaining the global prior model to extrapolate where experience is sparse. This enables efficient and stable online learning from each new experience without resorting to uninformed exploration over a vast space of possible behaviors. Equally important to continual on-robot learning is safety, allowing the robot to repeatedly practice and improve in the real w

arXiv:2608.26789v1 Announce Type: new Abstract: Accurate steering sensing and LiDAR-to-vehicle extrinsics are crucial for reliable path tracking in warehouse mobile robots (WMRs); miscalibration often leads to snaking, weaving, and elevated cross-track error (CTE). In practice, steering ``zero'' is commonly set manually (e.g., eyeballing straightness via a PS4 joystick), while LiDAR extrinsics are assumed from CAD and may drift after maintenance. Such static, manual procedures frequently cause miscalibration in safety-critical environments. This paper presents an Extended Kalman Filter (EKF)--based method for online estimation of steering offset and planar LiDAR extrinsics within a bicycle-kinematics model, providing a principled alternative to manual calibration. Experiments on real datasets show that correcting steering offset reduces CTE substantially, validating the effectiveness of the proposed approach.

arXiv:2608.26739v1 Announce Type: new Abstract: Accurate trajectory tracking in cable-driven lower-limb rehabilitation robots is challenging because model uncertainty, external disturbances, joint constraints, and pull-only cable actuation can degrade nominal control performance. Conventional model-based controllers provide an interpretable control structure but remain sensitive to model mismatch, whereas fully learning-based control can reduce transparency and complicate constraint-aware operation. This study proposes a residual deep reinforcement learning-enhanced computed torque control framework in which computed torque control generates the nominal command and a bounded Deep Deterministic Policy Gradient policy supplies only an additional compensating torque. The approach is evaluated in simulation under nominal, uncertain, disturbed, combined, and generalization conditions, together with trajectory-tracking, joint-limit, cable-demand, workspace-feasibility, and cable-Jacobian dia

arXiv:2608.26673v2 Announce Type: replace Abstract: Large pretrained vision-language-action models achieve strong robot-manipulation performance, while compact alternatives have largely pursued efficiency by compressing the prevailing observation-to-action paradigm. We investigate whether predictive sensorimotor modeling can make more effective use of a limited parameter budget than direct observation-to-action mapping. We present PredVLA, a language-conditioned predictive-coding policy with only 0.68 million trainable network parameters and no robot-data pretraining. Its hierarchical recurrent dynamics predict visual features and proprioception, while observations influence latent state only through prediction-error-driven online inference. On LIBERO, PredVLA achieves an 86.9% mean success rate across the three short-horizon suites and 75.4% across all four suites. Under a controlled comparison using the same frozen front end, demonstrations, action decoder, and evaluation protocol, P

arXiv:2608.26645v1 Announce Type: new Abstract: Vision-Language-Action Models~(VLAs) have demonstrated significant promise in generalizing to complex, long-horizon robotic manipulation tasks. However, their performance remains brittle, as they are typically trained on trajectory-monotonic, failure-free demonstrations. This reliance on ``perfect" data leaves them unable to recover from common execution errors, such as a missed grasp, a dropped object, or an unexpected collision. In this paper, we propose FLARE, a novel framework that endows VLAs with robust error recovery capabilities through a ``Retry" and ``Reset" paradigm. First, we introduce a ``Retry" mechanism by injecting perturbation and bridging segments that decouple robot pose from environment state into demonstrations, enabling the policy to autonomously handle execution deviations. Second, to address critical, state-breaking (OOD) failures, we introduce a ``Reset" pipeline. We leverage an MLLM for offline failure analysis t

arXiv:2608.26622v1 Announce Type: new Abstract: Achieving stable, sustained grasping with soft robotic hands remains a fundamental challenge. Compliance enables safe and adaptive contact, yet the intrinsic viscoelasticity of soft polymers leads to stress relaxation and a continuous decay of grasping force during holding. Inspired by human grasping, which combines phase-dependent stiffness regulation with continuous sensing and feedback, this paper presents an integrated structure--perception--learning framework. We develop a variable-stiffness soft gripper that uses onboard vision and infrared thermography to track deformation and the temperature field in real time, preserving continuous tracking of the interaction state. To mitigate relaxation-induced force decay, we propose a temperature-coupled viscoelastic force representation, together with a physics-informed learning model, to reconstruct the force trend and provide explicit compensation during holding. Experiments show that, in