News & Research

arXiv:2608.02411v1 Announce Type: new Abstract: Care robots are increasingly being introduced into healthcare settings, raising important questions about their acceptance and ethical implementation. To better understand these challenges, this study investigates caregivers' perceptions of four categories of care robots: delivering supplies, helping patients into bed, monitoring vital signs, and assisting with mobility. We conducted a mixed-methods study employing a mixed-factorial design in which 298 caregivers from the United States, Mexico, and Chile evaluated all four robot categories. Quantitative measures integrated constructs from the Unified Theory of Acceptance and Use of Technology, the Cognitive-Affective-Normative model, and overall acceptance ratings. Qualitative data were collected through open-ended questions and analyzed using a literature-informed ethical framework. The results indicate that participants across countries generally evaluated care robots positively, partic

arXiv:2608.02385v1 Announce Type: new Abstract: Humanoid motion trackers perform reliably within learned tracking distributions, but falls can move the robot into low-height, contact-rich states from which an advancing command is temporarily unreachable. Tracking-only policies may chase infeasible references, producing rapid, large-amplitude limb corrections that increase risk to the robot and its surroundings. We present StableMimic, a unified tracker trained beyond the nominal tracking distribution. Perturbed resets around multiple human get-up references expose prone, supine, off-balance, and intermediate ground-contact states, shaping structured recovery that returns the robot to the trackable region. Because tracking and recovery occupy markedly different state--action distributions, StableMimic uses dedicated experts for each regime and a proprioceptive gate that continuously blends their actions. A hidden successor-state objective teaches human-reference-shaped recovery without

arXiv:2608.02326v2 Announce Type: replace Abstract: Humans perform long-horizon manipulation by retaining knowledge of what earlier actions have established while continuously adapting the motion underway. By contrast, action-chunked vision-language-action (VLA) policies repeatedly replan from the current input at each query. Existing methods preserve either long-term task evidence through memory or short-term motion through action reuse and ensembling, leaving the cross-query handoff incomplete. We introduce ChainVLA, a 1.2B-parameter VLA policy that chains successive queries through a joint and revisable execution state. Progress Context combines a recurrent Working State with sparse event memory to carry observation-derived task progress, while Motion Tail feeds the preceding prediction's unexecuted continuation into state construction and action generation. Together, the two components condition a decoder that regenerates each action horizon under the latest observation, allowing t

arXiv:2608.02320v1 Announce Type: new Abstract: Traversability analysis is a fundamental capability for autonomous mobile robots operating in unstructured environments. While modern machine learning approaches such as deep neural networks and gradient-boosted trees achieve strong predictive performance, they lack interpretability and provide limited insight into the underlying terrain-robot interaction dynamics. In this paper, we propose TravKAN, a Kolmogorov-Arnold Network-based framework for fast, scalable, and interpretable traversability estimation. TravKAN represents multivariate decision functions through compositions of learnable univariate functions, enabling compact architectures and symbolic extraction of analytic expressions after training. In addition, we introduce a novel set of handcrafted features derived from the reflectivity channel of LiDAR sensors. To the best of our knowledge, reflectivity has not been systematically exploited for handcrafted traversability descript

arXiv:2608.02316v1 Announce Type: new Abstract: State estimation is a key component in model-based control of walking robots and, more broadly, applicable wherever hidden variables must be inferred. The Kalman filter is widely used to estimate floating-base position and velocity by fusing multiple sensing modalities. However, tuning noise parameters is challenging and typically requires expert knowledge. Moreover, fixed noise parameters are unsuitable for varying gaits and environments. We propose an online adaptation strategy for the process noise covariance matrix Q and the measurement noise covariance matrix R. Specifically, we introduce a filter residual and innovation-based covariance adaptation method for legged robot state estimation and evaluate it against a baseline approach relying on IMU and foot force measurements. The proposed adaptation is implemented within an Invariant Extended Kalman Filter (InEKF) fusing IMU and leg kinematics. Experiments on indoor and outdoor datase

arXiv:2608.02304v3 Announce Type: replace Abstract: Existing active reconstruction systems with Gaussian-splatting maps select observations greedily, optimizing a single next-best-view (NBV) at each step and connecting the chosen views by short-horizon path planning. This greedy decoupling disregards the global structure of scene information, producing inefficient trajectories that waste sensing capacity in transit between selected views. In this work, we study active reconstruction as an ergodic coverage problem: the time-averaged spatial statistics of the sensor trajectory should match a target information distribution induced by the current map. Our approach derives this target distribution online from uncertainty and visibility, and calculates ergodic trajectories via a kernel-ergodic horizon planner with gradient flow and footprint depletion, closing the loop between mapping and trajectory optimization. We thoroughly evaluate TRACE on the Replica dataset against the Next-Best-View

arXiv:2608.02270v1 Announce Type: new Abstract: Agriculture 4.0 robotic systems improve field efficiency yet remain too capital-intensive for the fragmented smallholdings that dominate global agriculture. Meanwhile, a growing number of retired low-speed electric-vehicle (LSEV) powertrains retain functional electromechanical value but are destructively recycled. This paper presents TS-MAMP (Telescopic-Sleeve Modular Agricultural Mobile Platform), a remanufactured robot built under 3R (reduce, reuse, recycle) circular-economy principles. Retired 48 V brushless-DC (BLDC) hub motors are paired via back-EMF matching, and lead-acid battery modules screened at 60%-80% state of health are actively balanced within a 100 mV inter-module voltage deviation. Together, these reused components reduce the powertrain-and-chassis BOM cost by approximately 60%, to below USD 450 (perception and weeding modules excluded). The truss chassis provides >=200 kg static load, continuously adjustable track width

arXiv:2608.02257v1 Announce Type: new Abstract: Mobile manipulation is a key capability for embodied intelligence, enabling robots to accomplish complex multi-stage tasks in open-world environments. However, mobile manipulation poses two key challenges for vision-language-action (VLA) policies: At the data level, the efficient collection of high-quality whole-body demonstrations demands the coordinated control of both the mobile base and the robotic arms; at the model level, existing VLA models predominantly rely on local camera observations, whose limited field of view hinders global spatial understanding. To address these challenges, we develop a whole-body teleoperation system and a panoramic-aware VLA policy. The system enables coordinated control of a wheeled bimanual robot through a single VR interface and supports the acquisition of a real-world mobile manipulation dataset comprising 5.5 hours of multimodal demonstrations. Building upon this dataset, we propose PanoVLA, a panora

arXiv:2608.02197v1 Announce Type: new Abstract: Visual representations of VLA models remain unreliable for spatially precise robotic manipulation. We uncover that vision encoders in VLAs also exhibit attention artifacts previously documented in generic Vision Transformers, and further show that, in embodied policies, these artifacts are closely associated with spatial perception capabilities acquired during post-training. As the encoder learns task-relevant information such as object location, depth ordering, and local geometry, limited global-token capacity causes part of this information to spill into low-information patch tokens. We introduce AtVLA, a framework that inserts learnable register tokens into the visual encoder. Trained end-to-end using only embodied data and the original action objective, these registers emerge as dedicated carriers of embodied spatial information, while the remaining patch tokens recover clean and spatially faithful attention distributions crucial for

arXiv:2608.02093v1 Announce Type: new Abstract: More than 70% of the people that fell overboard cruise ships in the period 2010-2019 lost their lives. This paper presents a strategy for reliably predicting the area a person may be in after a man overboard incident, and describes in detail the search methods to find them utilizing UAV technology. The search area prediction method employs an Extended Kalman Filter that capitalizes on the information from the Leeway model to track the missing person in the sea by taking into account the uncertainty of the movement of the person and the weather conditions in the area. Then, a UAV uses this information to search for the person. Five different methods for searching in this dynamic area are presented and evaluated - the Zigzag, the Boustrophedon, the Spiral, the Probability Informed Search and the Improved Probability Informed Search (IPIS) methods. The IPIS method provides success rate of over 80% on average for finding a person, even if the

arXiv:2608.02080v1 Announce Type: new Abstract: Whole-body tactile sensing is a prerequisite for humanoids that operate in contact-rich human environments, but conventional taxel arrays scale poorly with surface area, wiring complexity, and robot-specific curvature. We present a conformal electrical impedance tomography tactile skin fabricated through a geometry-adaptable additive-manufacturing workflow. A flexible conductive TPU layer forms a continuous sensing domain, while contact-induced coupling with conductive patches produces boundary voltage changes that are reconstructed using a one-step Gauss-Newton EIT solver. We first characterize the electromechanical design space of the layered structure and show that low-resistance contact-enhancement patches and a porous conductive TPU sensing layer improve sensitivity while preserving printability. We then validate contact localization on a planar prototype, a curved U-shaped prototype, and a qualitative iCub-face-shaped geometry. The

arXiv:2608.02069v1 Announce Type: new Abstract: Developing deployable locomotion policies through conventional reinforcement learning often requires complex reward engineering and expensive training times. While differentiable simulation offers a highly efficient alternative, open-source tools capable of end-to-end transfer of these policies to physical hardware remain limited. This paper introduces Open-DiffLoco, an open-source framework for training deployable blind quadruped locomotion policies with differentiable simulation. The framework implements the Short-Horizon Actor-Critic (SHAC) algorithm in MuJoCo XLA (MJX) and trains a proprioceptive policy that transfers to real-world hardware. The deployed policy removes privileged actor observations, including base linear velocity, and does not rely on reference trajectories. It also uses a substantially simplified reward function, enabling the robot to discover walking patterns without the complex auxiliary rewards typically used in c

arXiv:2608.02014v1 Announce Type: new Abstract: Cross-embodiment dexterous grasping aims to synthesize stable grasps across heterogeneous multi-fingered hands with little or no embodiment-specific tuning. Existing interaction-centric methods achieve promising results, but their object representations often underrepresent local surface geometry, while their robot descriptors do not explicitly encode both robot morphology and kinematics. We propose MANGO-Grasp, an anisotropic interaction framework that represents objects as geometry-oriented 3D Gaussian primitives and robot hands as surface keypoints encoded into morpho-kinematic descriptors. The object primitives are adaptively allocated by geometric complexity and shaped as surface-aligned plates with outward normals, encoding local geometry. Mahalanobis fields over keypoint--primitive pairs serve as interaction prediction targets during training and as optimization guidance for grasp realization at inference. These fields rise sharply

arXiv:2608.01981v1 Announce Type: new Abstract: This work presents a human-centered collaborative framework that integrates Preference-Based Optimization (PBO) and Dynamic Movement Primitives (DMPs) to optimize robot-assisted tasks such as painting. The system allows the operator to perform the process while the robot adapts its behavior in real-time, dynamically adjusting the orientation of the piece in order to match the orientation of the operator's hand. The PBO framework leverages the GLISp algorithm to iteratively refine control parameters such as execution time, robot responsiveness, and rotation amplification through human feedback. Moreover, DMPs have been modified to enhance the reactive behavior of the robot and its adaptability to ergonomic requirements. The method was validated with a heterogeneous group of participants executing \rev{painting tasks}. The results show that our strategy effectively reduces operator effort while optimizing process outcomes.

arXiv:2608.01880v2 Announce Type: replace Abstract: World Action Models generate fixed-horizon action chunks through iterative denoising, creating substantial inference latency that can cause pauses, stale actions, and discontinuities during robotic execution. We present an empirical study of asynchronous deployment strategies that overlap model inference with action execution to enable responsive and smooth control. We compare six strategies, including synchronous execution, pure asynchronous switching, post-hoc action blending, denoising-time blending, inference-time velocity guidance, and prefix-conditioned generation, on a 10 Hz bimanual robot. Evaluation combines offline trajectory analysis with online experiments across dynamic manipulation, precision-critical placement, and long-horizon tasks. Our results identify accurate temporal alignment between observations, predictions, and executed commands as a fundamental requirement. Alignment errors produce persistent chunk-boundary d