News & Research

arXiv:2607.28474v1 Announce Type: new Abstract: Vision-and-Language Navigation in Continuous Environments (VLN-CE) requires an agent to follow a natural language instruction, predicting a sequence of low-level actions to navigate a robot from a starting point to a target location. The A2A benchmark and the AgriVLN method pioneeringly extended VLN-CE from indoor scenes to agricultural scenes, while we observed a challenging distinction: In indoor scenes, whether a zone is traversable tends to be clear to classify, such as wood floors are traversable but concrete walls are not. In agricultural scenes, however, this issue tends to be ambiguous, such as an unripe cornfield might be traversable for a robotic dog but might be non-traversable for a human. To address this issue, we propose the TEA module, which estimates the traversability of the camera image, then alarm the decision-maker for rethinking when the predicted action does not align with the traversability map. We integrate it into

arXiv:2607.28443v3 Announce Type: replace Abstract: Decentralized robots often need a common view of what their team is becoming, even though each robot sees different evidence and cannot rely on a central estimate or output-level consensus. We ask whether compatible collective-state predictions can emerge under this constraint. Collective-State JEPA (CS-JEPA) trains every robot to predict the same fixed-width latent future from its own history and bounded neighbor messages, with no agreement loss; predictions and plans are never pooled at deployment. In a fresh independent replication, agreement improves for every seed and every evaluated split. Accuracy improves at the same time, ruling out the uninformative solution in which all robots merely collapse to one prediction: relative to capacity-matched raw-future reconstruction, collective-state error falls by 28.4 percent in distribution and by 64.4 to 75.6 percent under topology and swarm-size shift. Translation-free and crossed-pretr

arXiv:2607.28416v1 Announce Type: new Abstract: Curved tactile fingertips for dexterous manipulation must resolve fine contact geometry, distinguish normal and tangential loads, and capture transient signals. Existing curved vision-based tactile sensors struggle to combine accurate 3D reconstruction, three-axis force estimation, and high-speed processing in a compact form. This article presents FasTac, a curved vision-based tactile sensor integrating multispectral photometric stereo, dynamic-convolution force estimation, and hardware acceleration on a field-programmable gate array (FPGA). Single-image-sensor simultaneous multispectral imaging provides spatially aligned observations for robust surface normal estimation, followed by boundary-prior fast Poisson depth reconstruction. HyperForce uses position-aware dynamic convolution to model the spatially nonuniform mechanical response of curved elastomers and estimate three-axis forces. The complete image-to-normal-force pipeline is depl

arXiv:2607.28391v1 Announce Type: new Abstract: World Action Models (WAMs) combine future-state prediction with robot action generation, but existing approaches largely rely on visual futures. Visual prediction captures scene structure and object motion, yet provides limited supervision for force, deformation, shear, and slip during contact-rich manipulation. This creates two design requirements: tactile futures should carry meaningful physical information, and they should not become privileged cues for action generation. We present TacWAM, a mechanics-aware tactile WAM that addresses this challenge in three steps. First, a Spatially Aligned Fusion (SAF) Tactile Encoder maps tactile appearance, dense force fields, and deformation flow into a shared latent prediction space, with bilateral force and torque reconstruction preserving global contact information. Second, a tactile history encoder provides temporal context so future tactile prediction reflects how force and deformation change

arXiv:2607.28382v1 Announce Type: new Abstract: Transferring manipulation skills across object instances that share functionality but differ in geometry remains a fundamental challenge in robot learning. While recent correspondence methods leverage dense visual descriptors and 3D feature fields, nearest-neighbor feature matching often produces spatially incoherent correspondences that fail to recover the local geometric frames required for reliable skill transfer. We introduce SemAnCorr, a training-free framework that establishes dense correspondence by selecting semantically consistent anchor regions through joint pose-correspondence optimization and propagating these constraints over the object surface using functional maps. The resulting correspondences preserve both semantic consistency and geometric coherence, enabling object-centric manipulation skills to transfer across geometrically diverse instances. We evaluate SemAnCorr on a dense correspondence benchmark built on PartNet-Mo

arXiv:2607.28256v1 Announce Type: new Abstract: Collaborative robotics is a representative task-oriented 6G use-case, where communication quality should be reflected in mission execution, environment understanding, and closed-loop operation rather than packet delivery alone. This demo paper presents a robot-edge semantic communication (SemCom) testbed integrating robot-side visual compression, edge-side semantic mapping, and dashboard-based mission interaction. A mobile robot equipped with RGB-D sensing and LiDAR runs ROS 2, while a Jetson Orin edge node performs reconstruction, RTAB-Map mapping, semantic object handling, and browserbased visualization. As an initial proof of concept, RGB frames are encoded on the robot into VQ-VAE tokens using an ONNX Runtime encoder and reconstructed on the edge using a PyTorch decoder. A 320 X 240 image is represented by an 80 X 60 token grid with a packed payload of 5400 bytes, corresponding to a 42.67X reduction relative to model-input RGB bytes.

arXiv:2607.28198v1 Announce Type: new Abstract: Many dexterous manipulation tasks require the object to remain securely held throughout the interaction. From the perspective of hand-object relational motion, such manipulation comprises four canonical skills: grasping, relocation, in-hand rotation, and in-hand translation. Human hands flexibly compose these skills to accomplish complex tasks. Existing approaches, however, model these skills separately with skill-specific action constraints, objectives, or even dedicated hand morphologies, which breaks the compatibility and continuity required for long-horizon composition. In this work, we present a unified framework that models all four skills in a single formulation that shares the same state and action spaces and a common objective structure. This formulation enables straightforward distillation of a single cross-skill policy that performs strongly on every skill, generalizes to unseen objects, stays robust to disturbances, and chains

arXiv:2607.27922v1 Announce Type: new Abstract: Robots navigating among pedestrians typically sense their surroundings with a 2D LiDAR mounted close to the ground. At that height, the sensor mostly sees moving legs rather than whole people, yet most learning-based navigation methods still treat pedestrians as simple shapes like circles. This paper addresses that gap with CALF (Convolutional Attention for Leg Features), an end-to-end neural architecture that combines convolutional layers, attention, and MLP to interpret leg motion directly from LiDAR scans and produce safe navigation commands. The CALF policy is trained using deep reinforcement learning algorithms within LegNav, a custom lightweight 2D simulator that combines 2D LiDAR ray tracing with a novel pedestrian gait model. The resulting policy is compared against classical and learning-based baselines in terms of navigation performance and social compliance. The approach is validated through real-world experiments via zero-shot

arXiv:2607.27890v1 Announce Type: new Abstract: Visuomotor policies have advanced on manipulation tasks where the target object stays static during execution, but real deployments break this assumption: parts drift on conveyors and fruits sway in the wind. We introduce Static In, Dynamic Out (SIDO), a counterfactual action augmentation that enables a policy trained only on static object demonstrations to adapt to unseen object motion at test time. Our key idea is to factorize moving object manipulation into two sub-problems: predicting where the object will be, and reaching that predicted pose. SIDO displaces the object to a counterfactual future position and morphs the demonstrated action chunk to preserve the hand-object relative pose, yielding a goal-conditioned policy. At deployment an object pose predictor supplies the future position. Across three simulated tasks (Mug, Square, Stack) under five object motion patterns and two real-world tasks (Gantry, Peachtree), SIDO improves mov

arXiv:2607.27881v1 Announce Type: new Abstract: Vision-Language-Action (VLA) models have attracted growing interest as a scalable approach to robotic manipulation. While these models are effective action predictors, deploying them as robotic agents exposes critical gaps: no mechanism for failure recovery, inconsistent execution over long horizons, and limited robustness to shifts in observations, tasks, or embodiments. Existing solutions address these limitations individually through model retraining or environment-specific modules, yet what is needed is a general framework that systematically transforms a pretrained VLA into a robotic agent. We present RoboBRIDGE, a modular framework that provides an orchestration layer over five coordinated modules, namely Monitor, Perceptor, Planner, Controller, and Robot Interface, to compose robust robotic agents from off-the-shelf components, including pretrained VLAs. The Monitor pairs rapid failure detection with hierarchical recovery to correc

arXiv:2607.27784v1 Announce Type: new Abstract: Scalable collection of dexterous manipulation demonstrations remains a major bottleneck for robot learning. High-fidelity interfaces often require costly hardware and extensive setup, while low-setup, low cost alternatives tend to provide less precise control and impose greater cognitive workload on operators. We present DexDirect, a direct kinesthetic arm guidance for efficient dexterous demonstration collection. The operator drags a 6-DoF gravity-compensated robot arm directly by a handle, while a single webcam retargets operator's other hand onto a 16 joints 13-DoF dexterous robot hand. User studies suggest DexDirect collects 17.2x and 3.2x more successful demonstrations compared to purely vision (AnyTeleop) and pose-tracking (TeleDex) baselines. An adapted NASA-TLX shows DexDirect greatly reduces mental demand, effort, and frustration, despite raising physical demand. A diffusion policy trained on DexDirect demonstrations reaches a 90

arXiv:2607.27782v1 Announce Type: new Abstract: Flow-matching Vision-Language-Action (VLA) policies have shown strong potential for robotic manipulation but often suffer from compounding errors caused by distribution shifts during deployment. While offline reinforcement learning (RL) provides a practical way to improve deployed policies using rollout data, existing methods either ignore failure data or exploit it only at the trajectory level, resulting in low learning efficiency and persistent errors. We propose **RedFlow**, a fine-grained offline RL framework that redirects failure experiences into action-level corrective supervision for flow-matching VLA policies. RedFlow consists of two key components: (1) a **Context-Aware Corrective Matching** mechanism that identifies failure-inducing actions and retrieves successful alternatives from similar contexts as corrective targets, and (2) an **Adaptive Redirection Objective** that jointly reinforces successful actions, suppresses undesi

arXiv:2607.27713v1 Announce Type: new Abstract: Mobile robots can infer local flow structure from onboard sensing, but a locally plausible estimate is not always safe to write into a global map. Similar flow structures may produce ambiguous observations, while localization drift causes predicted patches to be written at incorrect locations. Repeated misregistered updates then accumulate into persistent ghost structures. We address this failure mode with a map-reference-aware conservative fusion framework. The model predicts a local velocity patch and a learned write-safety score that continuously attenuates uncertain map updates while permitting initialization when no reliable map reference is available. Across synthetic jet and crossflow environments, the proposed method reduces average ghost contamination by 42% relative to ungated fusion. A zero-shot hardware replay using real pressure and optical-flow measurements from a thruster wake further reduces ghost contamination by 39% whil

arXiv:2607.27690v2 Announce Type: replace Abstract: We introduce LabEvolver, a training-free framework that equips safe and grounded wet-lab agents with episodic memory from execution experience. LabEvolver couples a state-grounded inner trial loop for adaptive perception, online planning, and safety validation with an outer evolution loop that distills completed trajectories into reusable skill, strategy, and safety experience. On robotic solution-preparation tasks, LabEvolver demonstrates real-world feasibility, reducing pH-regulation completion time and safety-gate intercepts by 48.2% and 60.0%, respectively. On ALFWorld, it further improves cumulative success rate within 20 steps from 76.2% with ReAct to 91.4% over 500 continual tasks, showing generality beyond wet-lab settings. These results support learn-by-doing experience evolution as a feasible path toward closed-loop automated scientific discovery. The project page is available at https://andygao6186.github.io/LabEvolver/.

arXiv:2607.27627v1 Announce Type: new Abstract: Unmanned aerial vehicle (UAV) relay networks can restore connectivity after communication infrastructure is damaged. Urban relay placement is difficult because line-of-sight blockage, communication range, altitude, and three-dimensional obstacles must be considered jointly. Arm2Air transfers obstacle-avoidance skeletons from robot arms to UAV relay placement through cross-embodiment transfer. Source-domain robot-arm motions from a pretrained Neural MP model are converted into ordered skeletons that pretrain a transformer-based transfer platform, which is then adapted to the UAV domain using limited target data and Low-Rank Adaptation. The transferred skeleton initializes a relay chain that is refined for connectivity, bottleneck capacity, delay, and movement cost. On nine held-out high-clutter 3D urban maps, Arm2Air reduced median end-to-end planning runtime by 64.9 percent relative to the fastest conventional planner. On the high-obstruc