News & Research

arXiv:2606.18697v2 Announce Type: replace-cross Abstract: Model-based learning agents use learned world models to predict future states, plan actions, and adapt to new environments. However, the process of updating world models from collected experience creates a training-time attack surface: adversarially poisoned fine-tuning trajectories can manipulate the learned dynamics and thereby corrupt downstream planning. In this paper, we propose SWAAP, the first two-stage data poisoning framework for learned world models. In the first stage, SWAAP identifies a harmful target world model that induces low-return behavior under planning while remaining close to clean dynamics, using first-order bilevel optimization enabled by a transition-gradient theorem. In the second stage, SWAAP realizes this target through stealth-constrained gradient matching, modifying only a limited fraction of fine-tuning transition targets so that the induced training gradients steer the victim model toward the adver

arXiv:2606.18582v1 Announce Type: cross Abstract: The GOOSE 2D Fine-Grained Semantic Segmentation Challenge at the ICRA 2026 Workshop on Field Robotics evaluates dense semantic segmentation of off-road imagery over a fine-grained taxonomy of 64 classes and 11 evaluated non-void coarse categories. We present the first-place solution to this challenge. Our solution comprises two complementary improvements: (a) a network-level design that combines a self-supervised DINOv3 ViT-L/16 backbone, a ViT-Adapter, and a Mask2Former mask-classification decoder, together with a coarse-category auxiliary loss on the global [CLS] token; and (b) an inference-time aggregation strategy based on multi-scale and horizontal-flip test-time augmentation and an ensemble of the top three checkpoints selected using Codabench scores. Our method achieves an official composite score of 76.57%, consisting of 69.32% fine-class mIoU and 83.81% category-level mIoU, and ranks first on the final phase leaderboard: www.co

arXiv:2606.19340v2 Announce Type: replace Abstract: We present ZeroDex, a zero-shot framework for long-horizon dexterous manipulation that grounds language instructions into executable 3D task plans from calibrated multi-view RGB images. Rather than training an end-to-end policy, our system uses a vision-language model (VLM) to produce reference-frame task grounding and primitive-level 2D keypoints, then lifts them into 3D via multi-view fusion. This lifting combines triangulation of view-wise VLM groundings with reference-view ray voting, which searches along a semantic camera ray for geometrically consistent candidates across neighboring views. The resulting 3D keypoints support both pick-and-place and tool-use: for tool-use, we retrieve an object-centric atomic action corresponding to the inferred skill category and align its stored 6D tool trajectory to the scene; for dexterous execution, we expand the lifted grasp keypoint into a task-conditioned grasp affordance region and genera

arXiv:2606.19333v1 Announce Type: new Abstract: How can we scalably generate data for robotic manipulation, especially on human-like platforms such as dexterous multi-fingered hands? Learning from human videos has recently emerged as a likely answer to this question. However, difficulties in estimating hand-object interaction and crossing the human-to-robot embodiment gap have hindered the adoption of abundant monocular RGB-only human videos as the primary source of robot manipulation data. In this work, we present DO AS I DO, an algorithm to reconstruct and retarget monocular RGB human videos to multi-fingered dexterous robotic hands. DO AS I DO reconstructs hand-object interactions from various egocentric and exocentric in-the-wild video sources. The algorithm then retargets these hand-object interaction estimates into a sequence of actions executable in the real world, yielding robot-complete manipulation data from disparate human videos. Overall, DO AS I DO outperforms previous sta

arXiv:2606.19314v1 Announce Type: new Abstract: This study presents a method for modeling diverse plant branches by iteratively estimating material parameters to support delicate branch manipulation. Branch manipulation is necessary in agricultural robotics for plant repositioning, stabilizing, and clearing visual obstructions in dense foliage. The proposed method builds a tetrahedral branch model from point-cloud data and simulates its behavior using the finite element method. Using real observed deformation data, it iteratively estimates branch parameters and then computes an optimal path with a deformation-aware motion planner to move and stabilize branches within another robot's field of view. Across 30 trials on branches with varying geometries and material properties, the proposed method reduced the deformation energy by 35.69% while increasing the path length by 8.10% on average.

arXiv:2606.19267v1 Announce Type: new Abstract: We propose a mixed-reality, hardware-in-the-loop (HIL) testbed for autonomous vehicles that seamlessly integrates a physical testbed of mobile robots with a high-fidelity simulation environment. The virtual simulation enables the creation of diverse, safety-critical driving scenarios to validate state-of-the-art perception, planning, and control algorithms, while augmenting simulations with physical robots equipped with multimodal sensors in photorealistic virtual environments further facilitating rigorous validation. Our testbed also features vehicular connectivity using wireless communication and can accommodate a large number of agents through the combination of physical robots and virtual simulated agents, supporting research on multi-agent systems including Connected and Autonomous Vehicles (CAVs). Finally, we present a safety-guaranteed framework combining perception, planning and a novel online learning-based controller using Contr

arXiv:2606.19265v1 Announce Type: new Abstract: Continuum robots offer a promising approach for minimally invasive and natural-orifice surgical procedures due to their inherent compliance and dexterity. However, this flexibility also makes estimating the current shape of the robot challenging. Several approaches have been used to reconstruct the shape of these robots, including imaging, optical sensing, magnetic sensing, and resistive sensing. Strain sensors fabricated using direct laser writing (DLW) could provide an alternative sensing method. This technique involves using a laser to induce carbonization of certain polymers to create graphene patterns, such as strain sensors. In this paper, we demonstrate how a flexible continuum joint and a DLW sensor can be machined as one monolithic structure using the same laser and the same setup. The fabricated sensors are characterized using linear and nonlinear models, which are used to predict the joint angle with error as low as 1.76 degree

arXiv:2606.19240v1 Announce Type: new Abstract: Markerless, single-RGB-D-camera motion capture provides a low-cost and non-invasive alternative to conventional marker-based systems for robot teleoperation; however, depth estimation often degrades in the presence of self-occlusion, particularly during upper-limb motion. This paper presents an Arm Kinematic Correction (AKC) method that improves depth estimation by enforcing geometric constraints based on constant arm lengths. The proposed approach reconstructs occluded joint depths by leveraging wrist positions and predefined arm lengths via a deterministic formulation based on the Pythagorean theorem, thereby avoiding the need for complex probabilistic modeling or parameter tuning. Experimental validation against a Vicon reference system demonstrates reliable performance for both static and dynamic joint motions, evaluated using root-mean-square error (RMSE) and Pearson correlation. Furthermore, motion-mapping teleoperation is successfu

arXiv:2606.19233v1 Announce Type: new Abstract: In this letter, we present a hierarchical control framework that enables wheeled bipedal robots to perform planar object sliding tasks with their wheeled legs. The proposed approach formulates a nonlinear model predictive controller (NMPC) based on a reduced-order three rigid bodies (TRB) dynamical model that explicitly accounts for the hip roll degree of freedom and multiple wheel-environment contact modes, which is essential for lateral stepping and pedipulation tasks. Within this framework, the NMPC simultaneously regulates robot locomotion and interaction forces, allowing the robot to stably execute both rolling and object manipulation behaviors. A trajectory-optimization-based robot-object motion planner is developed to generate reference motions that incorporate stick-slip transitions in ground-object contact. Two representative pedipulation motions, namely scooting and lateral sliding, are validated through real-world hardware expe

arXiv:2606.19194v1 Announce Type: new Abstract: This paper presents an invertible neural network adapter for general robotic manipulation, designed to generate precise high-dimensional actions conditioned on multimodal observations, including visual, linguistic, and proprioceptive inputs, through a one-step denoising process. Built upon a flow-matching formulation, the proposed adapter effectively constrains the action generation trajectory within an invertible latent space, thereby enabling efficient and high-quality dexterous action synthesis with only a single inference step. Compared with conventional iterative flow-matching policies, the proposed framework substantially reduces inference complexity while maintaining strong action prediction accuracy and stability. Extensive experiments are conducted across a diverse set of simulation benchmarks and real-world robotic platforms to evaluate the effectiveness of the proposed method. Across simulation benchmarks, the proposed adapter

arXiv:2606.19190v2 Announce Type: replace Abstract: Robust state estimation and mapping in long-term, large-scale, and highly dynamic environments remains a key challenge in robotics. Existing LiDAR-Inertial-Visual Odometry (LIVO) systems achieve strong local accuracy but suffer from accumulated drift over long distances and may fail in geometrically degraded or textureless scenes. Meanwhile, GNSS-aided fusion frameworks often rely on LiDAR or visual odometry for state prediction and outlier rejection, making them vulnerable when odometry degenerates. To address these limitations, we propose a tightly coupled LiDAR-Inertial-Visual-GNSS fusion framework based on an Error-State Iterated Kalman Filter. An online spatiotemporal alignment module using Dynamic Time Warping is introduced for highly dynamic conditions. To better exploit GNSS precision, we develop observation models based on Doppler shifts and fixed-anchor Time-Differenced Carrier Phase, providing millimeter-level relative cons

arXiv:2606.19176v1 Announce Type: new Abstract: Autonomous UAV operations on ships require reliable vision-based relative pose estimation, yet at-sea validation is costly, weather-dependent, and risky. This paper presents a hardware-validated vision-in-the-loop framework that enables fully autonomous indoor flight while emulating photorealistic maritime environments. Rendered maritime views are processed onboard by a deep transformer-based monocular pose estimator. Delayed vision measurements are fused with high-rate IMU data using a delayed Kalman filter to provide consistent state estimates for geometric control. The system captures critical embedded effects, including perception latency, asynchronous updates, and computational constraints, that are absent in pure simulation. Autonomous takeoff, trajectory tracking, and landing experiments demonstrate stable closed-loop flight. The results establish a safe and hardware-realistic intermediate stage for developing maritime UAV autonomy

arXiv:2606.19161v1 Announce Type: new Abstract: Establishing a universal benchmark for tactile representation learning in robotic manipulation remains challenging due to the diversity of tactile sensor designs, data formats, and robot embodiments. Rather than seeking to establish such, we explore a scalable and promising direction for future development: egocentric vision paired with full-hand tactile data. To this end, we introduce \textbf{HT-Bench}, a large-scale multi-task benchmark for dexterous full-hand tactile sensing, comprising 10M RGB frames and 7.8M tactile frames collected across 226 tasks. HT-Bench evaluates tactile representations from three key perspectives: whether they encode meaningful contact geometry, whether they can align tactile observations with visual information, and whether they generalize to unseen tasks. To assess these capabilities, HT-Bench includes four tasks: fine-grained tactile similarity retrieval, masked tactile inpainting, vision-to-tactile synthes

arXiv:2606.19154v1 Announce Type: new Abstract: Autonomous robots operating under forest canopies need robust perception of trees and surrounding vegetation across varying seasonal conditions. Existing forestry datasets provide lidar or camera data with per-tree annotations, but none include co-registered 4D imaging radar -- a modality of growing interest for its resilience to visual degradation, surface contamination, and vegetation occlusion. We introduce a multi-sensor forest dataset collected by a mobile robot equipped with a high-resolution FMCW imaging radar, lidar, RGB camera, IMU, and RTK-GNSS. The site was recorded in two sessions under contrasting vegetation states, and 3D cuboid annotations -- including per-tree diameter estimates -- provide shared semantic labels across all three perception modalities. Furthermore, we provide baseline results for semantic segmentation of the radar and lidar point clouds using MinkowskiUNet. Radar achieves IoU scores competitive with lidar f

arXiv:2606.19122v1 Announce Type: new Abstract: Sidewalks in the real world are crowded, cluttered, and less structured than roads, making 3D occupancy prediction a key ingredient for the safe navigation of mobile robots such as delivery bots and electric wheelchairs. Existing occupancy learning pipelines are largely designed for on-road autonomous driving and often train on large-scale paired LiDAR-RGB datasets with dense 3D supervision and multiple camera inputs, which are costly to collect and do not adequately capture sidewalk-specific characteristics. We propose WalkOCC, a hybrid Ray-marching monocular 3D occupancy perception framework for robots operating on sidewalks. WalkOCC explicitly couples geometric grounding from LiDAR-RGB paired data with scalable learning from large-scale unpaired monocular images. It bootstraps pseudo occupancy supervision from paired sequences and jointly learns image-level representations on additional 2D-only data. It yields stable optimization and i