News & Research

arXiv:2601.00610v2 Announce Type: replace Abstract: Reinforcement learning (RL) has strong potential in robotics, but exploration-based training complicates safe deployment on large-scale robots. For such applications, this paper proposes a novel hierarchical goal-reaching framework that integrates stereo visual pose estimation, constrained RL-based motion planning, actuator-level robust adaptive control (RAC), and supervisory safe-return logic. Stereo visual localization is used as the real-time pose-estimation interface with loop closing, map fusion, and relocalization. The RL planner generates smooth, feasible goal-reaching references using a problem-specific reward structure and motion constraints that promote goal progress, reduce oscillations, preserve vision-consistent smoothness, and respect the mechanical limits of a heavy skid-steered robot. At the actuation layer, a scaled conjugate-gradient (SCG)-trained deep neural network (DNN) approximates a quasi-static actuator feedfor

arXiv:2509.06342v2 Announce Type: replace Abstract: Legged robots must achieve both robust locomotion and energy efficiency to be practical in real-world environments. Yet controllers trained in simulation often fail to transfer reliably, and most existing approaches neglect actuator-specific energy losses or depend on complex, hand-tuned reward formulations. We propose a framework that integrates sim-to-real reinforcement learning with a physics-grounded energy model for permanent magnet synchronous motors. The framework requires a minimal parameter set to capture the simulation-to-reality gap and employs a compact four-term reward with a first-principle-based energetic loss formulation that balances electrical and mechanical dissipation. We evaluate and validate the approach through a bottom-up dynamic parameter identification study, spanning actuators, full-robot in-air trajectories and on-ground locomotion. The framework is tested on three primary platforms and deployed on ten addi

arXiv:2504.19683v4 Announce Type: replace Abstract: Fine-grained robotic manipulation often fails when inaccurate initial grasps propagate errors and necessitate complex pose correction. We propose Grasp-Pretraining Augmentation (GPA), which incorporates grasp priors from task demonstrations into imitation policies without additional grasp-pose data or annotation. When added to RVT2, GPA raises the average success rate on RLBench from 79.3% to 84.2%. When added to ACT, it raises success on ALOHA cube transfer and bimanual insertion from 86% and 16% to 98% and 38%, respectively. To offset added computational costs, we develop Robotic Attention Mamba (RAM) for real-time deployment. RAM combines attention-based spatial feature extraction with state-space modeling to capture long-range dependencies efficiently. The resulting GPA-RAM framework supports discrete keyframe prediction and continuous action generation. We evaluate it on four platforms, including physical UR5 and ARX R5 systems.

arXiv:2607.29687v1 Announce Type: new Abstract: Sequential robot manipulation requires policies to execute novel combinations of familiar instruction components. However, collecting demonstrations for all possible instruction tuples is combinatorially expensive, while sparsely covered datasets often fail under out-of-distribution recombination. This paper studies compositional generalization through the lens of instruction-space coverage. We decompose the generalization gap into three sources: \textit{marginal instruction shift}, \textit{instruction-compositional shift}, and \textit{context--action shift}. This decomposition allows us to diagnose when sparse training coverage is sufficient, and what structure the training set must preserve for reliable action prediction. Our results show that exhaustive tuple enumeration is unnecessary: a structured subset, as small as one quarter of the full task space, can recover strong out-of-distribution performance when it covers action-relevant

arXiv:2607.29640v1 Announce Type: new Abstract: Flexible manufacturing requires rapid deployment of solutions and minimal setup time to remain competitive. An essential attribute is the ability to control error levels, as failures can range from minor performance degradation to severe equipment damage. However, conventional deployment often involves extensive setup, data collection, model training or parameter tuning, and system testing, resulting in significant delays that hinder commercial feasibility. We propose a data engine which gathers data and improves its performance while executing the task. The data engine consists of two classifiers, a fast model prediction and expensive verification. First, a model prediction is performed and based on the confidence level of the prediction, the expensive verification can be used. By adjusting the confidence level, users can control the level of tolerable error. Our method is implemented on a real-world robotic insertion task, which uses fo

arXiv:2607.29625v1 Announce Type: new Abstract: The demand for humanoid loco-manipulation tasks with an object has recently increased, and most existing control approaches for stability in such tasks rely on heuristics or machine-learning techniques. This study rigorously analyzes and exploits the dynamic effects of the object mass on balance stability. By formulating the object mass parameters in the whole-body dynamics with distributed contact wrenches and centers of pressure at the stance contacts, their nonlinear effects on the system momenta and constraints are quantified. The dynamic models and constraints are incorporated into the construction of the balanced state basin/boundary (BSB), a partition of the center-of-mass state space for a biped system to maintain balance in its desired contacts. The implications of the BSB for prediction and control are highlighted using a humanoid robot and an analytically tractable reduced-order mechanism. The BSBs under different conditions of

arXiv:2607.29622v1 Announce Type: new Abstract: Visual imitation learning enables robots to acquire visuomotor skills directly from images, yet RGB observations lack explicit geometric cues, making learned policies brittle to camera perturbations. To address this, we propose \textbf{Ray-conditioned Vision Transformer Encoder (RayViT)}, a lightweight architecture that injects camera geometry into pretrained ViT backbones. RayViT represents camera geometry as a Pl\"ucker ray map, patchifies it into ray features, and uses gated cross-attention to produce a ray-conditioned class token. These ray features are added as dense positional embeddings, while the ray class token replaces the original ViT class token to provide a geometry-aware summary representation. We combine this approach with an auxiliary cosine similarity loss to consistently improve the performance and robustness for geometry-aware tokens. Experiments on sim- and real-robot tasks demonstrate that RayViT improves robustness b

arXiv:2607.29613v1 Announce Type: new Abstract: Reinforcement learning (RL) post-training of Vision-Language-Action (VLA) models has shown strong promise for robotic manipulation. Among RL methods, critic-based approaches rely on a value estimator that predominantly operates on single-frame observations or single-frame VLM backbone latents, which is a fundamental mismatch with the partially observable nature of robot control. A naive approach to incorporate observation history into the critic incurs exponential complexity with high-dimensional visual space, and still fails because pure scalar-return regression provides insufficient supervision for learning cross-temporal dynamics. We identify the root cause as a state approximation problem: without an explicit world modeling objective, the critic's representation cannot capture the temporal structure needed for accurate value estimation. To address this, we propose the World Critic Model (WCM), built on a lightweight LeJEPA architectur

arXiv:2607.29600v1 Announce Type: new Abstract: Vision-and-language navigation (VLN) enables robots to follow instructions in previously unseen environments. Recently, a training-free paradigm has emerged: the robot queries a multimodal LLM to understand its observations and plan the next action. However, long-horizon navigation based on either image streams or dense map inevitably introduces a growing memory and reasoning bottleneck. We present HAM-VLN, a decision-coupled, agent-authored memory that equips the robot with a persistent, depth-grounded world graph. In the same model call used to select the next action, HAM-VLN also records semantic and reflective information---including room type, objects, navigation progress, and failure notes. Recent waypoints remain verbatim within a bounded window, while older history re-enters the context only through retrieval scored by relevance, recency, and salience, together with one-hop topological expansion. This design requires no additional

arXiv:2607.29569v1 Announce Type: new Abstract: This article presents a modular inference framework that integrates Flow Matching generative models with formal Control Barrier Function (CBF) safety guarantees. Unlike existing methods that apply external safety filters to a model's final output, our approach modifies the Flow Matching denoising process within the model to inherently generate safe trajectories. By employing a smooth Log-Sum-Exponential aggregate barrier, we enforce safety over entire action chunks. This aggregate barrier ensures a minimal increase in computational overhead and does not alter the semantic intent of the model. We show that, within the proposed framework, the 2-Wasserstein distance between the generated distribution and the target distribution remains bounded. Our method eliminates the need for safety-specific datasets or costly model retraining, providing a versatile solution for safe inference. We validate the approach on two robotic manipulation platform

arXiv:2607.29567v1 Announce Type: new Abstract: Manipulating transparent laboratory glassware that contains liquid is inherently safety-critical: even small geometric errors can cause unstable grasps and hazardous spillage. Although recent progress has been made in transparent object perception and robotic grasping, most existing systems optimize detection, depth reconstruction, and grasp planning independently, which leads to cross-stage inconsistency imperfect boundaries induce depth bleeding, distorted surfaces corrupt normal estimation, and task agnostic grasp scoring yields tilted or off-center grasps that fail under dynamic motion. In this paper, we propose TransGraspNet, a geometry physics consistent framework that explicitly enforces consistency from perception to execution through three coupled principles: boundary consistency to produce structurally reliable object contours as downstream priors, surface consistency to preserve geometric fidelity and surface normal accuracy du

arXiv:2607.29513v1 Announce Type: new Abstract: Generating safe corridors is essential for collision-free robotic motion planning, yet most existing methods rely on predefined reference paths, which bias corridor geometry and implicitly limit the homotopy classes that can be explored. We propose a reference-path-free corridor generation framework on graphs of convex sets (GCS) that constructs corridors directly as sequences of convex sets, allowing corridor structure to emerge from the free-space representation rather than from a guiding path. To reason about similarity among corridors, we extend visibility-based deformation from paths to convex-set sequences, enabling the fusion of topologically redundant corridors while preserving distinct alternatives. To overcome the limited adaptability of existing GCS methods based on static global decompositions, we further develop an adaptive multi-scale GCS, in which a sampling-based fine-scale graph supports localized updates and a visibility

arXiv:2607.29500v1 Announce Type: new Abstract: Cable-Driven Parallel Robots (CDPRs) are a type of parallel mechanism in which cables are used as actuators. Due to the two levels of redundancy and numerous constraints within the CDPR actuation, joint and operational spaces (together known as the tri-space), tracking a given trajectory in the operational space while satisfying constraints in tri-space simultaneously is challenging. To the best of the authors' knowledge, there does not exist any tri-space control framework, which is robust, effective, and directly applicable to several architectures of redundantly actuated CDPRs. This paper proposes a tri-space control framework that combines Reactive Control (RC) and Iterative-Learning Control (ILC) to perform repetitive tasks in the operational space. The framework allows the tracking of operational space trajectories online with feasible cable forces, while avoiding undesirable situations such as cable-link interference, joint interfe

arXiv:2607.29482v1 Announce Type: new Abstract: By relying on independent couplings from uninformative Gaussian priors, standard diffusion and flow matching models are forced to learn complex, high-cost vector fields to reach the physical action space. Generative models excel at capturing multimodal behaviors for robotic Learning from Demonstration (LfD), but often suffer from high inference cost. This paper introduces Temporal Policy, a generative framework based on stochastic interpolants that formulates action generation as a temporally coupled transport problem. By initializing the generative flow at the robot's recent history, we explicitly couple past states to future action sequences. This data-dependent coupling reduces transport cost and produces straight vector fields. We validate Temporal Policy across visuomotor simulation benchmarks and on a physical Barrett WAM 2x 7DoF teleoperation platform. Our approach reduces transport costs by nearly an order of magnitude compared to

arXiv:2607.29464v1 Announce Type: new Abstract: Different Length Alignment Sewing (DLAS), which involves stretching the shorter fabric to match the longer one and sewing them together in a straight line, is a challenging task that needs to satisfy several requirements when automating the sewing process. To address the challenges, this research proposes a novel robotic sewing system, Different Length Robotic Sewing System (DLRoSS), which consists of a roller type end-effector, attached to a 6-DoF manipulator. The end-effector composed of active shorter and longer fabric rollers, and a passive press-roller attached to the shorter-fabric roller. Assuming that one end of the two fabric layers are initially positioned under the sewing machine's presser foot, the system automates DLAS by operating in four distinct phases. (P1) Fabric wrapping: Individual fabric layers are picked, held, and wrapped from the other end onto the feed rollers. (P2) Sewing: During the sewing, the shorter fabric is