News & Research

arXiv:2606.06308v1 Announce Type: new Abstract: Triaxial MEMS accelerometers are widely used for inertial sensing, navigation, and sensor fusion, but existing calibration methods often rely on costly reference setups or nonlinear iterative optimization, limiting their efficiency and applicability to low-cost or self-calibrating systems. We present attitude-aided linear accelerometer calibration (ALAC), a method that operates on any platform providing orientation information, such as turntables, robotic arms, or inertial measurement units. ALAC constructs a combined error matrix (CEM) to represent sensor errors in a unified calibration model and enables linear least-squares estimation. The bias and gravity vector are jointly estimated, implicitly accounting for platform misalignment, and matrix decomposition of the CEM recovers scale, non-orthogonality, and alignment rotation parameters. Under static gravity, calibration is formulated as a constrained homogeneous least-squares (CHLS) pr

arXiv:2606.06281v1 Announce Type: new Abstract: Touch sensing is beneficial for solving a wide variety of manipulation tasks. While there exists a wide range of tactile sensors with different properties, exploiting the fusion of multiple heterogeneous tactile sensors to improve manipulation learning remains underexplored. We present Multi-Resolution Tactile Sensing (MiTaS), a representation framework that leverages multiple tactile sensors operating at different temporal resolutions in order to solve complex contact-rich manipulation tasks. We propose a novel architecture using modality-specific convolutional stems and transformer-based fusion that effectively fuses information from an RGB camera stream, a vision-based GelSight Mini sensor and a high-frequency event-based Evetac sensor. This multi-sensor representation then conditions a flow-matching policy for solving downstream tasks. Experimental results across five contact-rich manipulation tasks demonstrate the effectiveness of mu

arXiv:2606.06255v1 Announce Type: new Abstract: Point clouds are a primary sensory representation for robotic perception, underpinning LiDAR-based autonomous driving, simultaneous localization and mapping (SLAM), and navigation. Within these pipelines, Farthest Point Sampling (FPS) is the most well-known downsampling operator, as its uniform coverage preserves the geometric structure on which downstream perception relies. However, the large time complexity of classical FPS scales poorly with the million-point-per-second rates of modern 3D sensors, making it a dominant latency bottleneck that conflicts with the real-time and limited onboard compute budgets of robotic systems. Therefore, we propose RadiusFPS, an FPS acceleration framework based on spherical voxel pruning that preserves the standard FPS update rule under the same initialization and tie-breaking policy. By indexing the point cloud with spherical voxels, RadiusFPS derives a conservative geometric bound that prunes redundant

arXiv:2606.06250v1 Announce Type: new Abstract: Continuous-time SLAM provides a principled framework for fusing heterogeneous sensors while estimating smooth trajectories, and is particularly well-suited for handling heterogeneous, asynchronous sensor streams with non-uniform readout patterns, such as rolling shutter cameras, LiDAR scanners, radar sweeps, or event-based sensors. In this work, we introduce G-solver, a fully Gaussian and distributed framework that combines Gaussian Belief Propagation (GBP) with Gaussian Process (GP) motion priors for continuous-time trajectory estimation. Our GP model provides a probabilistic representation of the trajectory, enabling consistent interpolation and the use of data-driven hyperparameters, while GBP offers a scalable message-passing formulation well-suited for decentralized settings. The resulting solver naturally extends to multi-camera scenarios without specialized synchronization or engineering effort. We evaluate the approach on syntheti

arXiv:2606.06218v1 Announce Type: new Abstract: A policy tuned for one robot often behaves differently on another, whether due to the sim-to-real gap, unknown payloads, or the differing dynamics of two instances of the same robot. In contact-rich, dynamic manipulation, even small motion discrepancies can result in failure to track reference motion, since they disrupt the timing and modes of contact. Common remedies, such as domain randomization or system identification, either produce overly conservative task policies or require data that must be recollected for each robot or payload. We introduce the Torque Adaptation Module (TAM), a learned module that adapts the torque commands sent to the robot to match the behavior of an ideal robot. TAM operates between the low-level controller that tracks the policy's actions and the robot's torque interface. It includes a history encoder that embeds proprioceptive history into a latent state and a torque adaptor that computes residual torque co

arXiv:2606.06194v1 Announce Type: new Abstract: Egocentric human video offers a scalable alternative to robot data for pretraining, yet models pretrained on such video consistently underperform those pretrained on robot data. We attribute this gap to a missing signal, the active perception behavior in egocentric videos, where humans continuously reposition their viewpoint during manipulation, inducing camera motion that standard pipelines treat as noise. To address this, we present ActiveMimic, a pretraining framework that recovers synchronized camera and wrist trajectories from a single body-worn RGB camera, models camera motion as a viewpoint action, and jointly learns active perception and manipulation from in-the-wild egocentric human video before adapting to a target robot. Empirically, real-world experiments across tasks with diverse active perception demands show that ActiveMimic consistently surpasses baselines pretrained on human video and matches state-of-the-art models pretr

arXiv:2606.06155v1 Announce Type: new Abstract: Vision-Language-Action (VLA) models leverage the rich world knowledge of pretrained vision-language models (VLMs) to enable instruction-following robotic manipulation. However, the structural mismatch between VLM semantic spaces and embodied control policies often hinders the learning of precise perception--action mappings. To address this challenge, we propose \textbf{AffordanceVLA}, a unified framework that introduces structured affordance forecasting as a task-oriented intermediate representation to establish a more precise and robust perception--action mapping. Specifically, we progressively model manipulation priors through three complementary components: 1) \textbf{Which2Act} for object-centric grounding via visual latent prediction to suppress distractions; 2) \textbf{Where2Act} for 2D interaction localization via affordance map estimation; and 3) \textbf{How2Act} for 3D geometric reasoning to guide manipulation policies. These aff

arXiv:2606.06139v1 Announce Type: new Abstract: We present MotionDisco, a framework that discovers contact-rich, long-horizon humanoid loco-manipulation motions from scratch, without relying on teleoperation or motion retargeting from human demonstrations. This is challenging because the space of possible contact interactions grows combinatorially with the task horizon and the number of objects in the scene. MotionDisco enables rapid discovery of novel motions by coupling a large language model (LLM) guided evolutionary search over sequences of interactions with an efficient sequential kinodynamic trajectory optimizer and pruning strategy, enabling the rapid discovery of novel skills. Through extensive ablation studies, we show that our LLM-guided search discovers successful whole-body trajectories across several challenging long-horizon tasks. Finally, by training reinforcement learning tracking policies on the discovered trajectories, we transfer the motions to a real humanoid robot.

arXiv:2606.06130v1 Announce Type: new Abstract: As underwater robotics research increasingly addresses complex 3D perception and autonomous navigation, the fidelity of sonar simulation has become a key factor in algorithm development. Current simulation frameworks typically rely on geometry-driven rendering, approximating 3D sonar as an underwater equivalent to LiDAR, which fails to account for fundamental acoustic phenomena such as refraction, multi-path interference, and phase-dependent signal formation. This paper proposes a modular architecture for realistic 3D sonar simulation that integrates GPU-accelerated graphics engines with physically grounded acoustic propagation principles. We implement a volumetric 3D sonar model within the NVIDIA Isaac Sim environment, modeled after the Water Linked 3D-15 sensor, and integrate it into a comprehensive underwater simulation framework. The system is validated through a hardware-in-the-loop configuration, where a modified FastLIO2 SLAM pipel

arXiv:2606.06077v1 Announce Type: new Abstract: Autonomous underwater vehicle (AUV) launch and recovery (LAR) into the hull of an advancing host platform requires traversal of a complex, three-dimensional propeller wake whose hydrodynamic structure cannot be characterised by a uniform current model. High-fidelity Reynolds-Averaged Navier-Stokes (RANS) Computational Fluid Dynamics (CFD) simulations resolve this structure with sufficient accuracy for path planning, but their computational cost renders them impractical for onboard use. We address this gap by integrating two conditional generative adversarial network (cGAN) architectures -- a regularised PatchGAN and a 2D3DGAN with self-attention -- as drop-in replacements for RANS CFD data within a three-dimensional, energy-weighted A* path planning framework. Both generators are driven by a hierarchical pipeline that synthesises full $128^3$ voxel flow field volumes from scalar operating condition inputs alone, with end-to-end inference

arXiv:2606.06061v1 Announce Type: new Abstract: This paper presents a distributed conversational framework for human-robot collaborative manipulation that integrates local language and vision-language models (VLMs) with a Robot Operating System 2 (ROS 2)-based execution stack. Language understanding, visual grounding, orchestration, and motion execution run as separate ROS 2 nodes, enabling flexible deployment across distributed hardware while maintaining a responsive control loop. From free-form user commands, the system generates structured action requests for pick, place, and handover. It uses a VLM to return image-space targets, which are converted into metric robot-frame goals using depth and calibration. A web dashboard exposes intermediate intent and grounding overlays (pixel, depth, and robot-frame) and requires explicit operator confirmation before any motion is executed. Experiments on a Franka FR3 platform evaluate end-to-end task reliability and latency under increasing wor

arXiv:2606.06049v1 Announce Type: new Abstract: Intra-vehicular robots in spacecraft help reduce astronaut workload and improve mission efficiency. Recent research focuses on using deep learning methods to achieve the acute control required for operations in these complex environments. However, objects exhibit unpredictable, unconstrained drift without gravitational damping. These factors demand robustness against complex multimodal action distributions. Diffusion policies (DP) can model these complex actions, but their iterative sampling process consumes too much energy for the limited power budgets of spacecraft. We therefore propose a low-energy intra-vehicular robotic manipulation framework, L-SDPPO, in which the Spiking Diffusion Policy (SDP) is optimized with a reinforcement learning (RL) algorithm. Furthermore, to address the insufficient perception of dynamic spatiotemporal features in microgravity, we propose the statedependent latency injection (SDLI) mechanism, which mimics

arXiv:2606.06041v1 Announce Type: new Abstract: As robotic systems become more sophisticated, the growing complexity of their motion planning models and the longer training times pose substantial challenges. Evolutionary algorithms such as the Sample-efficient Cross-Entropy Method (iCEM) have recently demonstrated promising potential for low-level real-time planning by leveraging efficient knowledge reuse strategies to improve performance. Although effective in many control tasks, iCEM's performance can be constrained in more complex scenarios, particularly those requiring stacking, sliding, and shelf placement. In this work, we propose a novel iCEM+TL framework that explicitly leverages Transfer Learning (TL), where key iCEM parameters are transferred from simpler upstream tasks to guide more complex downstream tasks. Additionally, we applied Reward Redesign (RR) through task decomposition for stacking objects and shelf placement to optimize task-specific performance. Results from the

arXiv:2606.06040v1 Announce Type: new Abstract: Soft, growing vine robots extend through tip eversion, a mechanism that enables navigation through cluttered environments. However, integrating cameras and other sensors at the tip is uniquely challenging because the material forming the tip is constantly renewed as the robot grows. This continual material turnover, combined with friction between internal layers, added tip weight, and fabric constriction, complicates sensor and tool mounting. These limitations hinder the deployment of vine robots for inspection and search tasks, where rapid growth while carrying tip-mounted sensors is essential. In this work, we present a triangular roller tip mount that reduces internal resistance during growth by rolling rather than sliding against the robot body. The design was refined through iterative failure analysis, enabling, for the first time, consistent eversion on a TPU-coated ripstop nylon vine robot. To quantitatively evaluate mount performa

arXiv:2606.06033v2 Announce Type: replace Abstract: Learning dexterous manipulation requires demonstrations that preserve fine hand-object interactions while remaining executable at deployment. Existing pipelines either lose deployable dexterity through retargeting or embodiment conversion, or rely on robot-specific teleoperation that is costly to scale and often lacks intuitive, contact-aware control for dexterous data collection. We present RealDexUMI, a wearable universal manipulation interface built around a shared dexterous end-effector module that integrates a lightweight dexterous hand, in-hand vision, and fingertip tactile sensing. A palm-side isomorphic teleoperation glove maps human finger inputs to robot-hand joint commands, enabling real-time, retargeting-free, intuitive, and precise hand control. The shared hand and sensing modules yield zero-gap end-effector data, with matched in-hand observations, tactile signals, contacts, and hand actions between collection and deploym