News & Research

arXiv:2607.09078v1 Announce Type: cross Abstract: Object detection is a fundamental component in numerous Unmanned Aerial Vehicle (UAV) applications, yet it has long been plagued by hindrances like occlusion or target pixel scarcity. Active Object Detection (AOD) provides a novel paradigm to address these challenges via active vision, while UAV-based AOD research remains scarce due to the lack of high-quality datasets and benchmarks for algorithm development and evaluation. To fill this gap, this paper presents ATRNet-LUDO, the first large-scale real-world dataset for UAV-Ground Active Object Detection (UGAOD). It contains 121,000 multi-view panoramic multi-target aerial images and 1.21 million local single-target slices, covering 10 vehicle targets across 40 scenarios. It enables the construction of diverse training and testing environments for UAV agent interaction and active observation policy learning. Based on this dataset, we establish a comprehensive evaluation benchmark for AOD

arXiv:2607.08966v1 Announce Type: cross Abstract: Soft metamaterials provide a promising platform for robotics, biomedical devices, and flexible electronics. The localized mechanical responses by nonuniform excitation are ubiquitous in soft materials, yet their controlled transmission across assemblies remains largely overlooked in metamaterial design, which critically constrains nontrivial functionalities with end-to-end and long-range deformation transmission. Here, we introduce an impedance-guided design framework that enables programmable transmission of localized deformation in modular soft metamaterials, achieving behaviors unattainable by intuitive design. By establishing a nonlinear model considering position-dependent interactions and integrating the concept of mechanical impedance within metamaterials, we regulate assembly-level transmission solely through unit-cell topology optimization. The resulting framework enables effective synthesis of module families, allowing both ho

arXiv:2607.09648v1 Announce Type: new Abstract: In this work, we present B-spline Policy (BSP), an action representation designed for accelerating robot manipulation policies. Rather than predicting discrete-time action chunks, BSP parameterizes actions as continuous B-spline curves defined by a set of knots and control points. This representation yields smooth, time-continuous trajectories that can be temporally scaled and executed by low-level controllers at higher frequencies and speeds. We show that B-spline-parameterized actions can be seamlessly integrated into standard policy learning pipelines by directly predicting B-spline parameters. Experiments on simulated and real-world tasks demonstrate that BSP significantly reduces task completion time, achieving substantial improvements over baseline methods while maintaining strong success rates. More results: https://b-spline-policy.github.io

arXiv:2607.09590v1 Announce Type: new Abstract: Precision industrial contact manipulation requires reliable robot policies under pose perturbations and contact-force constraints. Vision-language-action models offer broad generalization but often introduce high inference latency and GPU-memory cost, while vision-action chunking policies are more suitable for real-time industrial control. However, these policies are usually trained by behavior cloning and suffer from distribution shift in contact-rich tasks. This paper proposes PAC-ACT, a reinforcement-learning post-training framework for pretrained Action Chunking Transformer policies. PAC-ACT reformulates policy optimization at the chunk level, constructs an ACT-transferred actor-critic architecture, and introduces a hybrid behavior-prior constraint to preserve the pretrained action distribution during online fine-tuning. Experiments on industrial precision-contact benchmarks show that PAC-ACT improves task success, contact stability,

arXiv:2607.09587v1 Announce Type: new Abstract: Decentralized multi-robot coordination under partial observability remains challenging, especially in communication-free settings where agents must act solely from local sensor observations. Privileged policy distillation provides a promising approach by transferring knowledge from a globally informed oracle to sensor-constrained students. However, in multi-agent systems, the same local observation may correspond to multiple global configurations requiring qualitatively different cooperative actions, making the conditional action distribution inherently multi-modal. Standard deterministic distillation collapses these modes to their mean, often yielding invalid or hesitant actions. To address this issue, we propose CoDiMAD, a three-stage framework that trains a privileged oracle with MAPPO, constructs an offline dataset of local-observation-oracle-action pairs, and distills the oracle into decentralized students parameterized as conditiona

arXiv:2607.09557v1 Announce Type: new Abstract: Fine grain control and positioning of autonomous underwater vehicles (AUVs) is critical for sampling, maintenance, and survey applications. Traditional control methods for AUVs are labor intensive and are not robust to changes in the vehicle configuration or environmental conditions. Reinforcement learning (RL) promises rapid controller development while handling a range of deployment parameters via domain randomization (DR). However, DR is still limited by the capacity of the underlying simulation to model real physics. In particular, drag physics are difficult to model and are a large contributor to sim-to-real gaps. Meanwhile, computational fluid dynamics (CFD) provides high fidelity drag models but is challenging to leverage within reinforcement learning frameworks due to its computational overhead. Thus, in this paper we exploit the idea of training surrogate approximations of CFD models of a given vehicle, enabling fast inference wi

arXiv:2607.09548v1 Announce Type: new Abstract: Aerial manipulation with multirotor platforms enables physical interaction in complex environments, but rotor-induced airflow remains a critical limitation for tasks involving airflow-sensitive targets or surroundings. This paper presents an optimization-based design framework for modular aerial manipulators that jointly considers task wrench feasibility, end-effector placement, and airflow exposure constraints. We first introduce a novel categorization of target-side airflow tolerance and formulate the corresponding exposure requirements as geometric constraints. To efficiently model rotor-induced airflow, we introduce a compact cone-sphere envelope that approximates the spreading structure of a quadrotor's airflow while preserving computational tractability for optimization. Building on this formulation, we propose a reconfiguration optimization that adapts a modular aerial manipulator to diverse task wrench requirements while enforcing

arXiv:2607.09527v1 Announce Type: new Abstract: The integrity of hydrogen infrastructure relies on reliable leak detection, performed almost exclusively via manual tracer gas sniffing in electrolyzer manufacturing. Although mandated by standards, the lack of spatial probe guidance instructions leaves detection reliability entirely to operator execution, further compromised by sensor signal delays. This study quantifies how sniffer trajectory kinematics affect detection reliability at small-scale pipes and fittings, a near-field regime largely neglected by macroscopic dispersion research. Using a robotically guided test bench to eliminate operator variability, static concentration fields and dynamic trajectory passes were acquired across representative geometries under standardized leak rates (5 vol% hydrogen in nitrogen) and varying scanning velocities. Results demonstrate that scanning velocity and spatial probe orientation strongly dictate detectability. Conventional linear trajector

arXiv:2607.09519v1 Announce Type: new Abstract: We present DemoBridge, an toolkit that turns a single-view RGB stereo recording of a human hand demonstration into an executable, physics-validated robot-arm trajectory. Retargeting across the embodiment gap is hard. A robot arm reaches a target with a long, articulated body whose links carry far more collision volume than a hand. Solving inverse kinematics for the mapped end-effector pose often yields no collision-free solution, and a trajectory imposes this at every waypoint. A single view adds noise, leaving the demonstrated reference inaccurate. At the core of DemoBridge is a single collision-aware planner. It optimizes the whole joint trajectory at once, reasoning jointly over alternative grasp poses, whole-arm and grasped-object collision, and fidelity to the demonstrated path. A physics simulator runs in the loop. It validates each phase as it is produced and backtracks on failure, so a demonstration that cannot be reproduced as gi

arXiv:2607.09515v1 Announce Type: new Abstract: Robotic manipulation tasks often require simultaneous reasoning over motion and contact forces, yet most Learning from Demonstration (LfD) methods model only spatial trajectories and neglect force interactions with the environment. This limitation reduces robustness and can lead to unsafe or inconsistent task reproduction in force-constrained settings. We propose a novel one-shot multimodal LfD framework for the segmentation, encoding, and reproduction of force-inclusive demonstrations. First, we introduce a multimodal probabilistic segmentation method that adaptively weighs spatial and force modalities over time, enabling the automatic extraction of force-aware motion primitives. Second, we extend the elastic maps representation to incorporate external force constraints during skill encoding and formulate a convex optimization procedure for learning force-consistent trajectory models. The resulting skills reproduce both motion and contac

arXiv:2607.09365v1 Announce Type: new Abstract: Video-based manipulation provides object-centric motion priors from human demonstrations, generated videos, or RGB-D observations, but such priors are typically embodiment-agnostic and cannot be directly executed by a specific robot. This paper presents \textbf{PhysV2A}, a reachability-gated and semantic-mask-constrained feasibility-completion framework for converting video-derived 6D object motion into robot-executable manipulation trajectories. The key idea is to treat grasp feasibility as trajectory-conditioned rather than local: each RGB-D-generated 6-DoF grasp candidate is rigidly coupled with the recovered object motion to form a grasp-conditioned TCP trajectory hypothesis. PhysV2A then performs hierarchical reachability-gated selection, where infeasible grasp--trajectory pairs are rejected by robot-centric kinematic checks and surviving candidates are ranked by downstream execution suitability. For the selected reachable trajectory

arXiv:2607.09323v1 Announce Type: new Abstract: The shortage of healthcare staff is a challenge in geriatric care. To address this, robots can be integrated into care settings to provide assistance and emotional support. A promising application is walking guidance, particularly benefiting older adults as navigation skills deteriorate with aging. As walking guidance involves direct contact, the aim of this study is to understand how older adults perceive and respond to different touch modes during guided walking. 24 older adults (68 - 88 yrs.) walked four times a ten-meter trajectory guided by the robot TIAGo Pro in four contact conditions: no physical contact (NC); physical contact through holding the robot's wrist with the hand (HH); physical interaction through linking arms with the robot (LA); and physical contact through resting the forearm on the robots forearm (FC). A multimodal assessment approach included electrocardiogram, electrodermal activity, contact force, distance to rob

arXiv:2607.09319v1 Announce Type: new Abstract: Reliable terrain understanding is a prerequisite for autonomous robot navigation. Yet, the widespread RGB-based perception can fail under low illumination, shadows, and material ambiguities. In this work we propose DRIFT, a lightweight multispectral framework that combines raw spectral bands and illumination-tolerant band-ratio representations through a dual-stream residual architecture and a differential fusion branch. Band ratios attenuate multiplicative acquisition effects (illumination/sensor gains), while the differential fusion explicitly highlights discrepancies between absolute-band and ratio-derived cues, which improves the robustness to noisy or partially unreliable spectral measurements. In the paper (i) we evaluate DRIFT on a new oil-on-soil multispectral dataset acquired using a MicaSense RedEdge-P camera mounted on an Unmanned Aerial Vehicle, and (ii) we provide an additional controlled study on water-on-grass under varying

arXiv:2607.09315v1 Announce Type: new Abstract: We aim to address the challenge of teleoperating robotic arms for high-degree-of-freedom (high-DoF) manipulation tasks, which is cognitively demanding and error-prone, particularly when relying on low-bandwidth interfaces. We propose Robot Trajectron V3 (RT-V3), a probabilistic shared control framework designed for $SE(3)$ grasping tasks. RT-V3 formulates shared control as Bayesian inference by learning a prior over user intent and combining it with real-time user commands to estimate the posterior intent distribution. The prior models user intent as a distribution over future trajectories conditioned on past robot dynamics and visual scene context. The intent prior is parameterized by a transformer-based conditional generative model that reasons over point clouds and candidate grasp poses, together with a factorized translation-rotation representation that improves learning efficiency in high-dimensional action spaces. During execution,

arXiv:2607.09261v1 Announce Type: new Abstract: Virtual Reality (VR) offers a flexible and controllable platform for studying human-robot interaction. Prior work has explored VR for socially aware robot navigation. However, whether VR captures the multimodal interaction dynamics observed in real-world human-robot co-navigation remains insufficiently understood. In this work, we present a VR prototype and evaluate its suitability for studying multimodal human-robot interaction (HRI) in socially aware navigation. Specifically, we investigate whether VR preserves the multimodal interaction dynamics observed in real-world human-robot co-navigation. We conducted a within-subjects study (N = 21) in which participants interacted with a PR2 mobile manipulator robot in both a motion capture equipped arena and its virtual replica in an immersive VR environment. Two common co-navigation scenarios were examined : orthogonal crossing and pass-by interactions. Participants evaluated the robot's perc