News & Research

arXiv:2606.25083v2 Announce Type: replace Abstract: Accurate extended pose estimation (orientation, velocity, and position) for IMU-instrumented articulated rigid-body systems is a key challenge in robotics and human motion analysis. The invariant extended Kalman filter (IEKF) addresses this problem for a single rigid body with convergence guarantees and consistency under unobservability, but extending these properties to articulated systems is nontrivial: inter-body pose coupling prevents a direct application, and incorporating joint kinematic constraints within the invariant framework remains an open problem. To address this gap, we introduce the relative L-extended pose, a Lie group representation for kinematic-tree systems based on relative poses between bodies. With one IMU per body, it yields group-affine dynamics and allows joint constraints to be expressed in invariant form. We incorporate these constraints as noise-free pseudo-measurements within an iterated IEKF (IterIEKF), t

arXiv:2606.03694v2 Announce Type: replace Abstract: Meaningful human-robot interaction (HRI) requires a robot to continuously assess user engagement through persistent user tracking. However, state-of-the-art Multi-Object Tracking models are heavily optimized for surveillance or autonomous driving. A social robot faces distinct egocentric challenges, such as humans moving in unpredictable nonlinear patterns, obstructing each other, or leaving and reentering the scene. These dynamics trigger frequent identity switches (IDSW), causing the robot to lose its footing mid-conversation. To address this, we introduce a focused, custom-annotated egocentric dataset collected via the Furhat robot. We present a systematic evaluation isolating detection errors from tracking logic, comparing face versus body tracking, and assessing the impact of extended memory and appearance re-identification (ReID). Results indicate that increasing temporal memory mitigates prolonged occlusions but fails on comple

arXiv:2604.25698v3 Announce Type: replace Abstract: Tendon-Driven Continuum Robots (TDCRs) pose significant control challenges due to their highly nonlinear, path-dependent dynamics and non-Markovian characteristics. Traditional Jacobian-based controllers often struggle with hysteresis-induced oscillations, while conventional learning-based approaches suffer from poor generalization to out-of-distribution trajectories. This paper proposes a reference-augmented offline learning framework for precise 6-DOF tracking control of TDCRs. By leveraging a differentiable RNN-based dynamics surrogate as a gradient bridge, we optimize a control policy through an augmented reference distribution. This multi-scale augmentation scheme incorporates stochastic bias, harmonic perturbations, and random walks, forcing the policy to internalize diverse tracking error recovery mechanisms without additional hardware interaction. Experimental results on a three-section TDCR platform demonstrate that the propo

arXiv:2604.25691v2 Announce Type: replace Abstract: Tendon-Driven Continuum Robots (TDCRs) pose significant modeling and control challenges due to complex nonlinearities, such as frictional hysteresis and transmission compliance. This paper proposes a differentiable learning framework that integrates high-fidelity dynamics modeling with robust neural control. We develop a GRU-based dynamics model featuring bidirectional multi-channel connectivity and residual prediction to effectively suppress compounding errors during long-horizon auto-regressive prediction. By treating this model as a gradient bridge, an end-to-end neural control policy is optimized through backpropagation, allowing it to implicitly internalize compensation for intricate nonlinearities. Experimental validation on a physical three-section TDCR demonstrates that our framework achieves accurate tracking and superior robustness against unseen payloads, outperforming Jacobian-based methods by eliminating self-excited osci

arXiv:2603.12120v2 Announce Type: replace Abstract: We introduce CRAFT hand, a tendon-driven anthropomorphic hand with hybrid hard-soft compliance for contact-rich manipulation. The design is based on a simple idea: contact is not uniform across the hand. Impacts concentrate at joints, while links carry most of the load. CRAFT places soft material at joints and keeps links rigid, and uses rollingcontact joint surfaces to keep flexion on repeatable motion paths. Fifteen motors mounted on the fingers drive the hand through tendons, keeping the form factor compact and the fingers light. In structural tests, CRAFT improves strength and endurance while maintaining comparable repeatability. In teleoperation, CRAFT improves handling of fragile and low-friction items, and the hand covers 33/33 grasps in the Feix taxonomy. The full design costs under $600 and will be released open-source with visionbased teleoperation and simulation integration. Project page: http://craft-hand.github.io/

arXiv:2603.04560v2 Announce Type: replace Abstract: Recent works use a neuro-symbolic framework for general manipulation policies. The advantage of this framework is that -- by applying off-the-shelf vision and language models -- the robot can break complex tasks down into semantic subtasks. However, the fundamental bottleneck is that the robot needs skills to ground these subtasks into embodied motions. Skills can take many forms (e.g., trajectory snippets, motion primitives, coded functions), but regardless of their form skills act as a constraint. The high-level policy can only ground its language reasoning through the available skills; if the robot cannot generate the right skill for the current task, its policy will fail. We propose to address this limitation -- and dynamically expand the robot's skills -- by leveraging user feedback. When a robot fails, humans can intuitively explain what went wrong (e.g., ``no, go higher''). While a simple approach is to recall this exact text t

arXiv:2602.22346v2 Announce Type: replace Abstract: Autonomous mobile service robots, such as lawnmowers or cleaning robots, operating in human-populated environments need to reason about human-human interactions to support safe and socially aware navigation. For such systems, interaction understanding is not primarily a fine-grained recognition problem, but a perception problem under limited sensing quality and computational resources. Many existing approaches focus on holistic group activity recognition, often relying on complex and computationally expensive models that are not well suited for mobile robotic platforms. In this work, we argue that pairwise human interactions constitute a minimal yet sufficient perceptual unit for robot-centric social understanding. We study the problem of identifying interacting person pairs and classifying coarse-grained interaction behaviors sufficient for downstream group-level reasoning and robot decision-making. To this end, we adopt a two-stage

arXiv:2510.25850v3 Announce Type: replace Abstract: We introduce Debate2Create (D2C), a multi-agent LLM framework that formulates robot co-design as structured, iterative debate grounded in physics-based evaluation. A design agent and control agent engage in a thesis-antithesis-synthesis loop, while criterion-specific LLM judges provide multi-objective feedback to steer exploration. Across five MuJoCo locomotion benchmarks, D2C achieves the highest default-normalized score among the evaluated LLM-based and black-box baselines, with gains up to 3.2x on Ant and nearly 9x on Swimmer. Iterative debate yields 18-35% gains over compute-matched zero-shot generation, and D2C-generated rewards transfer to default morphologies in 4/5 tasks. These results suggest that structured, simulator-grounded multi-agent interaction is a useful mechanism for joint morphology-reward optimization under a fixed-topology, per-candidate-RL protocol. Project page: debate2create.github.io.

arXiv:2510.00814v2 Announce Type: replace Abstract: Robotic fabric manipulation remains challenging due to fabric deformability and occlusions from wrinkles and the manipulator. This paper defines Random-to-Target Fabric Flattening (RTFF) as the task of bringing a randomly wrinkled fabric to an arbitrary user-specified wrinkle-free target pose. RTFF requires simultaneous flattening and pose alignment, where the two objectives are inherently coupled since flattening the fabric displaces its pose, while realigning it tends to introduce wrinkles. To solve this task, this paper anchors both the current and target fabric states to the same template mesh, enabling direct vertex-level wrinkle and pose assessment without registration. Building on this representation, a hybrid Imitation Learning--Visual Servoing (IL--VS) RTFF policy is proposed. A novel Mesh Action Chunking Transformer (MACT) leverages structured mesh observations to achieve goal-conditioned coarse alignment from a compact demo

arXiv:2509.21543v4 Announce Type: replace Abstract: Large Language Models (LLMs) have recently shown strong promise for robotic task planning, particularly through automatic planning domain generation. However, prior approaches largely treat generated planning domains as planning utilities, which are brittle under imperfect logical states and perception noise, overlooking their potential as scalable sources of reasoning supervision and structured reward signals. At the same time, reasoning LLMs depend on chain-of-thought (CoT) supervision that is expensive to collect for robotic tasks, and reinforcement learning (RL) faces challenges in reward engineering. We propose Self-CriTeach, an LLM self-teaching and self-critiquing framework in which an LLM autonomously generates symbolic planning domains that serve a dual role: (1) enabling large-scale generation of robotic planning problem-plan pairs, and (2) providing structured reward functions. First, the self-written domains enable large-s

arXiv:2505.21916v3 Announce Type: replace Abstract: Embodied robots have achieved strong performance in many real-world manipulation tasks, yet agile dynamic manipulation remains challenging due to high sensitivity to motion parameters and sparse outcome-level feedback. Tasks such as shooting a basketball into a hoop require precise control of fast open-loop motions, where small trajectory variations can lead to large outcome deviations, making data-efficient adaptation difficult for existing methods that rely on large-scale interaction, reward engineering, or accurate dynamic modeling. We propose Prior Reinforce (P.R.), a simple and practical framework for goal-conditioned dynamic manipulation. The method first learns a structured motion manifold from a small set of demonstrations using a conditional diffusion model, and then adapts motions toward new goals through feedback-driven optimization in a low-dimensional condition space. By separating motion generation from outcome-driven ad