News & Research

arXiv:2609.12883v1 Announce Type: new Abstract: Magnetic levitation (MagLev) systems have great potential for application in high-mix, low-volume manufacturing due to their scalability and flexibility, enabling highly reconfigurable in-machine material flow. However, their manipulation capabilities remain largely unexploited, as current applications almost exclusively focus on transportation. To enable grasping and manipulation directly on MagLev systems without requiring additional costly handling equipment, such as industrial robot arms, we present the Gripper MagBot, a low-cost parallel 6-DoF manipulator with an integrated 1-DoF gripper that mechanically couples three MagLev movers. The Gripper MagBot supports two operating configurations: a default mode and a single-track mode, selectable depending on the required stability and workspace footprint. To reconfigure a machine, the MagBot can be autonomously dropped off and picked up using a docking station. We showcase pick-and-place

arXiv:2609.12837v1 Announce Type: new Abstract: LiDAR-based SLAM (Simultaneous Localization and Mapping) and LIO (LiDAR-inertial odometry) algorithms are often used for precise navigation of unmanned aerial vehicles, especially during interactions with the aerial robot's environment. However, the performance of these algorithms is greatly dependent on the scenario, LiDAR, and robot motion characteristics, often requiring an intensive tuning process to achieve the desired performance. To aid these tuning efforts, this paper analyzes the influence on performance of the parameters of an EKF-based LIO algorithm (FAST-LIO2) and the LIO module of a graph-based SLAM algorithm (Cartographer) on aerial LiDAR SLAM datasets recorded using different LiDARs in low-to-moderate-altitude flights in diverse environments. The analysis is conducted on the absolute trajectory error (ATE) resulting from processing the datasets with the LIO algorithms configured with each combination of parameters obtained

arXiv:2609.12831v1 Announce Type: new Abstract: As the number of autonomous robots continues to grow, safety becomes increasingly important. Control barrier functions (CBFs) provide a theoretically grounded framework for ensuring safety, but existing design methods often face limitations in effectiveness, scalability, or interpretability, and may result in overly conservative safe sets. In this paper, we propose \emph{VertexCBF}, a framework for learning neural CBFs in a scalable, systematic, and explainable way. We approximate the stationary Hamilton--Jacobi value function using a neural network trained via a combination of physics-informed and sparsely supervised learning. By exploiting control-affine dynamics and a convex polytope control set, under which the Hamiltonian is maximized at the control vertices, we efficiently generate supervision points via GPU-parallel vertex-restricted tree search, while a residual architecture guarantees that the learned CBF is never larger than the

arXiv:2609.12795v1 Announce Type: new Abstract: We present a custom high-fidelity vehicle dynamics simulation environment for testing and validation of Autonomous Racing software. The digital twin of the autonomous vehicle is developed in Dymola, using racecar dynamics modeling libraries to build a complete multi-body model. A 3D road surface, including elevation profiles and curbs, is implemented using the Curved Regular Grid (CRG) standard. The model is exported from Dymola as a Functional Mock-up Unit (FMU) and integrated into a custom software-in-the-loop simulator, where communication interfaces with the autonomous racing stack were developed in C++. A calibration procedure based on experimental data is also presented, along with a validation study to further support the quality of the proposed framework. The simulator runs in real time on a portable computer and provides reliable ground truth for algorithms validation prior to real-world deployment.

arXiv:2609.12737v1 Announce Type: new Abstract: Robots are increasingly used in unstructured environments. The need for them to safely grasp unknown objects without damaging them becomes crucial. Humans achieve this by sensing and quickly responding by adjusting their grasping force. Similarly, effective grasp acquisition in robots requires compliant interaction strategies that can adapt to uncertain object properties and adjust to any instabilities during manipulation. We present a geometry-aware force/torque-based contact estimation method for a coarse position-controlled gripper, combined with an adaptive admittance controller for safe grasp acquisition. The desired contact forces are estimated online to keep stable contact with objects of unknown properties. This enables compliant and stable grasps while avoiding excessive forces. Experiments with objects of different sizes, shapes, stiffnesses, and weights show that the proposed algorithm not only prevents slippage but also applie

arXiv:2609.12721v1 Announce Type: new Abstract: Applying an imitation learning policy to a new manipulation task usually requires collecting new demonstrations and retraining the model, which makes sample efficiency a practical concern. Pretraining on large-scale robot datasets is effective in this respect, but such datasets are costly to collect and train on, while data augmentation techniques typically require a new round of data generation and retraining for each task. A complementary question is what useful prior can be provided to a policy at negligible cost before any task-specific data are collected. In this study, we construct a geometric visual pretraining dataset in which each scene contains only a plane, an object, and a hand, and trajectories are generated automatically. The scenes contain neither textures nor backgrounds; pretraining primarily exposes the policy to the geometric relationship between the hand and the object. Furthermore, representing the hand as a cube avoi

arXiv:2609.12677v1 Announce Type: new Abstract: Earthmoving tasks such as excavation, backfilling, or embankment construction require deliberate repositioning of deformable soil. For these tasks, human operators use all shovel faces, while autonomous systems so far are limited to excavation and dumping. Current methods often rely on heuristic models but do not incorporate soil mechanics. We address this shortcoming by using Reinforcement Learning in a GPU-parallelized Material Point Method particle simulation. Our controllers are conditioned on material state such as shape and compactness, enabling skills that use multiple contact faces of the tool and displace material both inside and outside of the shovel. To use the same learned weights across machines, our policies operate in a normalized end-effector space and are deployed through a calibrated machine interface. We evaluate this calibrated transfer on an 11.5t hydraulic excavator and a 500g tabletop robot. We validate performance

arXiv:2609.12660v1 Announce Type: new Abstract: This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing over

arXiv:2609.12641v1 Announce Type: new Abstract: Robot foundation models achieve strong in-distribution performance but often degrade under visual distribution shifts. When learning to generate actions from pretrained visual representations, models may exploit task-irrelevant visual cues that correlate with demonstrated actions within the training distribution. Such vision-action shortcuts can undermine generalization when these correlations change under distribution shifts. Mitigating these shortcuts requires constraining how visual information is used for action generation while preserving task-relevant spatial information. We propose Latent Interface Training (LIT), a framework-agnostic two-stage strategy that first establishes a spatial-goal-conditioned action prior without images, then constrains visual conditioning through a pose-supervised latent interface. Stage 1 trains the action expert to generate action chunks conditioned on language, robot state, and each demonstrated chunk

arXiv:2609.12634v1 Announce Type: new Abstract: Shape control of deformable linear objects (DLOs) is challenging for imitation learning because deformation behavior varies with material properties such as stiffness and elasticity, so a single policy must generate different action sequences for different objects even when the goal shape is identical. We propose a diffusion policy conditioned on material labels that are estimated online during manipulation. A recurrent estimation network predicts the material label of the grasped object from the time series of multi-view images and robot joint states, and the predicted label conditions the diffusion policy at every inference step. We collected 480 real-robot demonstrations covering four DLO materials and three groove-placement tasks, and compared per-material specialist policies, a task-conditioned policy without material labels, a policy conditioned on ground-truth material labels, and the proposed policy. Conditioning on ground-truth m

arXiv:2609.12614v1 Announce Type: new Abstract: A 3D scene graph groups objects into rooms. When a robot is asked to fetch an object from the kitchen, that grouping is what tells it where to look. An object recorded in the wrong room is not retrievable by a query naming the correct room. We introduce Progressive Boundary Closure, which recovers room layer from a monocular RGB video. A SLAM front end and an open-vocabulary segmenter supply a structural point cloud, camera trajectory and object tracks. The cloud is rasterised into a top-down map, rooms are recovered from it, and each object takes the room holding most of its extent. The difficulty lies in the map itself. Walls are recorded only where the camera looked, so a gap in the boundary may be a doorway or a stretch of wall that was never observed; nothing distinguishes the two. Prior methods treat both as passages, merging rooms that should remain separate. We observe that both require the same treatment: a room should not extend

arXiv:2609.12609v1 Announce Type: new Abstract: Differences in vehicle kinematic characteristics between production autonomous vehicles (PAVs) and human-driven vehicles (HVs) have been limitedly investigated by empirical studies. Most recent studies rely on simulation-based models, while some further investigate low-level adaptive cruise control (ACC) systems in controlled experiments. These methods commonly adapt some time-domain metrics to characterize PAV-HV differences across limited driving conditions. However, current PAVs equipped with high-level autonomous driving systems generate driving behaviors in a black box using data-driven models. These fundamentally different mechanisms for generating behaviors may produce distinct kinematic characteristics in traffic. More importantly, these time-domain metrics cannot reflect frequency-related traffic dynamics across different driving scenarios. Thus, this study adapted a real-world PAV dataset with four PAV platforms and developed a

arXiv:2609.12595v1 Announce Type: new Abstract: This paper presents an online coverage path planning algorithm for unknown environments. During navigation, the initially unknown search area is progressively decomposed into disconnected subareas as new obstacle information is acquired and coverage proceeds. These subareas are organized in an incrementally constructed decomposition tree that preserves their hierarchical parent-child relationships. Based on this tree, a global coverage tour is maintained and updated online by prioritizing newly generated child subareas according to their exploration states and distances from the robot. A local planner then generates coverage motions within each selected subarea, allowing the robot to adapt its trajectory as the environment is gradually revealed. Its performance is evaluated via high-fidelity simulations in complex scenarios. The results show improved coverage efficiency in terms of path length and overlap ratio in comparison to three base

arXiv:2609.12549v1 Announce Type: new Abstract: Dexterous manipulation requires coordinated multi-finger control and effective tactile feedback, yet learning these capabilities remains challenging due to the lack of large-scale real-world data and the difficulty of extracting effective representations from sparse tactile signals. We build a robot platform and teleoperation system to collect a 200-hour bimanual dexterous manipulation dataset with synchronized visual, tactile, and language annotations, comprising 10,576 trajectories across 65 tasks, 69.5% of which involve dexterous multi-finger manipulation. We further propose STAR, an integrated training recipe for vision-tactile-language-action (VTLA) models that addresses the spatial, temporal, and informational sparsity of tactile signals through visual-tactile joint pre-training, sparse-global tactile token representation, and sparse future tactile prediction. Trained on this dataset, STAR achieves a 61% average success rate across

arXiv:2609.12530v1 Announce Type: new Abstract: Autonomous precision milling of biological structures is challenged by incomplete knowledge of target geometry, local material thickness, and critical internal boundaries. Subject-specific preoperative models can address geometric and thickness variations, but static models cannot determine boundary status encountered during execution, while repeated target-specific imaging limits scalability. This article presents an uncertainty-aware autonomous milling framework that assigns complementary roles to generic anatomical priors and active boundary perception. A generic anatomical prior provides conservative global guidance and is transformed through semantic-guided registration and hybrid vision-force calibration into robot-executable guidance for individual targets. As milling approaches uncertain boundaries, the robot actively probes the remaining structure and uses relative stiffness changes to estimate boundary status and structural deta