News & Research

arXiv:2608.20823v1 Announce Type: new Abstract: A humanoid has infinitely many ways to stand up from sitting while maintaining balance, making sit-to-stand (STS) a challenging control problem. We synthesise natural humanoid STS motion from scratch using reinforcement learning, without demonstrations or reference trajectories. A single Proximal Policy Optimisation policy learns smooth, human-like rising driven by three complementary components. (i) A coupled force/chair-height curriculum is used. A vertical pelvis-assist force aids early trajectory exploration and decays over training. Taller chairs are unlocked with decaying assisting force. This ensures that the policy masters a viable STS trajectory at each chair height before being exposed to harder ones, avoiding the premature distribution shift that otherwise collapses generalisation. (ii) Motion robustness is achieved by randomly sampling from a large number of inverse kinematics-generated initial and target poses spanning over e

arXiv:2608.20784v1 Announce Type: new Abstract: Imitation learning for robotics depends on human demonstrations, some of which people may later ask to remove. Retraining without them is the natural reference, but its cost grows with policy and dataset scale, motivating cheaper operators that edit a trained policy. Metrics inherited from machine unlearning, such as forgetting loss or a single membership attack, do not establish what an edit removed from a policy acting in closed loop. We therefore introduce a retrain-calibrated audit that reads demonstration unlearning along two axes: behavior, whether the edited policy acts like one retrained without the removed demonstrations, and evidence, whether an auditor can still detect it was trained on them. The behavior axis measures action divergence to that retrain at matched states, calibrated by a floor built from independent retrains, so a policy at the floor is as close to a retrain as retrains are to each other. The evidence axis appli

arXiv:2608.20655v1 Announce Type: new Abstract: Planning and control of fixed-wing Unmanned Aerial Vehicles (UAVs) are challenging due to nonlinear dynamics, aerodynamic limits, and environmental disturbances. Differential flatness offers a principled way to generate fast, feasible trajectories, but its use has largely been confined to model-free controllers, which lack predictive capabilities and demand tuning. In this paper, we propose a unified framework that integrates differential flatness-based trajectory generation with Nonlinear Model Predictive Control (NMPC), combining computationally efficient planning with predictive, constraint-aware control. To further improve robustness, we introduce a wind-aware sampling strategy embedded within the NMPC framework, enabling the generation of dynamically feasible reference trajectories that proactively account for wind disturbances while strictly enforcing aerodynamic and control input constraints. We validate the proposed framework thro

arXiv:2608.20546v1 Announce Type: new Abstract: As the demand for larger manipulation datasets grows, handheld robotic gripper data collection and the associated gripper designs become more vital. Current data collection device designs trend towards matching the morphologies of existing robotic grippers, sacrificing ergonomics and manipulation performance. In this paper, we propose a co-design framework that guides the simultaneous development of both data collection and robotic execution devices by weaving both platform constraints into the design process. Through this workflow, we present the Koala Gripper system, a data capture device and robotic gripper platform that improves dexterity and grasp capability compared to parallel jaw grippers while preserving scalability and ease-of-use. The design introduces a novel force-optimized finger/trigger linkage mechanism with directional reflected mass characteristics, a unique monolithic dual-thumb, and user-centered ergonomic design. The

arXiv:2608.20433v1 Announce Type: new Abstract: Advances in technology have led to increasingly sophisticated musical humanoid robots. However, their use has largely been limited to performance and related research in human-robot interaction. In this position paper, we propose a novel perspective: musical humanoid robots as experimental interfaces for investigating music-evoked emotions. We argue that current research is constrained by paradigms relying on pre-recorded auditory stimuli, which fail to capture the multimodal, embodied, and interactive nature of real-world musical experience. Building on existing theories of music cognition and emotion, we identify mechanisms that require controlled manipulation of both acoustic and non-acoustic variables. We show that humanoid robots are well-suited as they enable parametric control of performance variables, reproducibility across trials, and the decoupling and recombination of auditory, visual, and interactive components. We illustrate

arXiv:2601.11665v3 Announce Type: replace-cross Abstract: Unmanned Aerial Vehicles (UAVs) are transforming infrastructure inspections in the Architecture, Engineering, Construction, and Facility Management (AEC+FM) domain. By synthesizing insights from over 150 studies, this review paper highlights UAV-based methodologies for data acquisition, photogrammetric modeling, defect detection, and decision-making support. Key innovations include path optimization, thermal integration, and advanced machine learning (ML) models such as YOLO and Faster R-CNN for anomaly detection. UAVs have demonstrated value in structural health monitoring (SHM), disaster response, urban infrastructure management, energy efficiency evaluations, and cultural heritage preservation. Despite these advancements, challenges in real-time processing, multimodal data fusion, and generalizability remain. A proposed workflow framework, informed by literature and a case study, integrates RGB imagery, LiDAR, and thermal sen

arXiv:2510.25960v2 Announce Type: replace-cross Abstract: In this paper, we present a framework that uses acoustic side-channel analysis (ASCA) to monitor and verify whether a robot correctly executes its intended commands. We develop and evaluate a machine-learning-based workflow verification system that uses acoustic emissions generated by robotic movements. The system can determine whether real-time behavior is consistent with expected commands. The evaluation takes into account movement speed, direction, and microphone distance. The results show that individual robot movements can be validated with over 80\% accuracy under baseline conditions using four different classifiers: Support Vector Machine (SVM), Deep Neural Network (DNN), Recurrent Neural Network (RNN), and Convolutional Neural Network (CNN). Additionally, workflows such as pick-and-place and packing could be verified with similarly high confidence. Our findings demonstrate that acoustic signals can support real-time, low

arXiv:2510.01192v2 Announce Type: replace-cross Abstract: Emulating empathy in human-robot interaction is a key component for achieving satisfying social, trustworthy, and ethical robot interaction with older people. Following comments from older adult study participants, the article uses humanities methods to identify a gap in defining empathetic robot care activities. It provides a design focus to mitigate it. Current human-robot designs, to a certain extent, neglect to include empathy as a theorized design pathway. Using one digital humanities research collection on humanoid robots, it contributes an empathetic care vocabulary as a design pathway for a productive underlying foundation for designing Socially Assistive Robots (SARs) that aim to support older people's goals of aging-in-place. Using rhetorical theory, this paper defines the socio-cultural expectations for convincing empathetic relationships.

arXiv:2505.13064v4 Announce Type: replace-cross Abstract: Multi-body mechanical systems have rich internal dynamics, whose solutions can be exploited as energy-efficient control targets. Yet, solutions non-trivially depend on system parameters, obscuring feasible properties for use as target trajectories. For periodic regulation tasks in robotics applications, we investigate properties of nonlinear oscillations collected in Lyapunov subcenter manifolds (LSMs) of conservative mechanical systems (CMs). Using a time-symmetry of CMs, it is shown that mild non-resonance conditions guarantee that LSMs exclusively consist of oscillations between two points of zero velocity. The existence of a unique generator is proven, which is a connected, 1D manifold that collects these points of zero velocity for a given LSM. Furthermore, it is shown that an additional spatial symmetry provides LSMs with yet stronger properties of Rosenberg manifolds. Here all oscillations pass through a unique equilibriu

arXiv:2604.17810v2 Announce Type: replace Abstract: This paper considers multi-agent embodied question answering (MA-EQA), which enables robot teams to answer queries based on their long-horizon observations. In contrast to existing edge resource management methods that optimize sensing, communication, or computation performance metrics, MA-EQA focuses on the quality of aggregated memory. To address this paradigm shift, we propose a quality of memory (QoM) model based on generative adversarial exam (GAE), which leverages forward simulation to evaluate memory retrieval and utilizes the resulting exam scores to quantify QoM. Based on the QoM model, we develop a memory-centric power allocation (MCPA) scheme that maximizes memory quality under communication resource constraints. Through analytical characterization in the noise-limited regime, we reveal a GAE-augmented capped water-filling structure for MCPA. Extensive experiments demonstrate that MCPA achieves significant improvements over