News & Research

arXiv:2607.03027v1 Announce Type: new Abstract: The decline of human balance control due to aging and pathological conditions increases fall risk, a major concern in geriatric care and rehabilitation. Gait training is essential for balance recovery, enhancing walking ability and postural control. However, existing overground robotic gait trainers have limitations: body weight support systems are bulky and impractical for daily use, while end-effector-based systems often compromise transparency, altering natural gait dynamics. This paper presents the Dynamic Robotic Balance Assistant (DRBA), a novel gait trainer providing assist-as-needed body weight and balance support for various training scenarios. DRBA integrates a 3-degree-of-freedom (3-DoF) robotic arm for pelvic support with flexible motion, a compact sit-to-stand assistance module, and user-following and fall detection algorithms to ensure minimal interference and responsive support. Experimental results demonstrated high transp

arXiv:2607.03017v1 Announce Type: new Abstract: The aging global population drives demand for assistive robots, yet the safety risks and costs of physical testing make Human-in-the-Loop (HITL) simulation an attractive alternative. Its fidelity for coupled systems, however, is limited by interaction models whose impedance parameters are tuned heuristically rather than identified from data. We present a Real2Sim pipeline that identifies the coupled Physical Human-Robot Interaction (pHRI) dynamics of a pelvis--strap interface on an overground mobile balance assistant. The interface is modeled as a 6-DoF viscoelastic mechanism whose 12 directional stiffness and damping parameters are identified per subject via Covariance Matrix Adaptation Evolution Strategy (CMA-ES), using the user's ``Safe \& Comfortable'' feedback as a reproducible operating point that resolves harness-tightness ambiguity across anthropometrics. An intraclass-correlation analysis over a five-subject cohort separates shar

arXiv:2607.02977v1 Announce Type: new Abstract: Diffusion-based motion planners have demonstrated strong performance in generating diverse and high-quality robot trajectories in cluttered environments with multiple feasible solutions. However, existing approaches typically operate on fixed-length waypoint sequences, making the learned model resolution-dependent, thereby preventing zero-shot generalization across resolutions. In this work, we propose Function-Space Diffusion for Motion Planning (FSD-MP), a diffusion-based motion planner that models trajectories as continuous functions and performs diffusion directly in function space, achieving discretization-invariant trajectory generation. We define a mode-wise forward process in the spectral domain, driven by Gaussian noise with a Mat\'ern-type covariance, and parameterize the reverse process with a boundary-compatible Discrete Sine Transform-based Fourier Neural Operator (DST-FNO) that preserves start-goal constraints across resolut

arXiv:2607.02924v1 Announce Type: new Abstract: As autonomous vehicles (AVs) operate in increasingly dynamic traffic conditions, lateral control must be performed while longitudinal speed and acceleration vary. Yet many existing lateral controllers rely on constant-speed or operating-point-based assumptions, which can degrade performance during transient longitudinal maneuvers. Moreover, most methods assume precisely known vehicle parameters, despite real-world parametric uncertainties. To address these limitations, this paper presents a longitudinal-motion-aware robust nonlinear lateral control framework for AVs. It first derives a tracking error model that depends on varying longitudinal speed and acceleration. Using this model, feedback linearization is employed to obtain a linear input-output relation for lateral error tracking while embedding longitudinal motion into the control law. The resulting internal dynamics are then analyzed to ensure overall system stability. To address p

arXiv:2607.02884v1 Announce Type: new Abstract: We address sampling-based motion planning for continuous-time stochastic systems under process and measurement uncertainty, with probabilistic guarantees on safety and performance. The robot dynamics are modeled as a continuous-time linear stochastic differential equation, while sensor measurements arrive at discrete time instants. We derive an offline hybrid belief propagation model in which the belief evolves according to continuous-time ODEs between measurements and undergoes discrete Kalman filter update jumps at measurement times. To ensure safety, we introduce a belief-barrier-function-based safety checker for segment-level probabilistic verification. This enables the planner to certify safety over entire continuous trajectory segments and detect inter-sample chance-constraint violations that are missed by conventional node-based checks. Together, these components provide a principled framework for sampling-based belief planning tha

arXiv:2607.02865v1 Announce Type: new Abstract: Pretrained vision-language-action (VLA) policies show promising zero-shot generalization, but often fail under deployment-time distribution shift, leading to decreased robustness and inconsistent instruction following. While prior work commonly tackles this by finetuning on in-distribution data, it assumes demonstrations collected on tasks in the target environment. In this work, we propose DREAMSTEER, a deployment-time steering framework for pretrained VLAs without any finetuning or parameter modifications. The key insight in DREAMSTEER is to leverage a latent world model and a value model to steer pretrained VLA policies. During deployment, DREAMSTEER samples candidate action chunks from a VLA policy and predefined motion primitives, imagines their outcomes using an action-conditioned latent world model, and ranks the imagined trajectories with a language-conditioned value model. Across four real-world manipulation benchmarks with unsee

arXiv:2607.02845v1 Announce Type: new Abstract: Multi-view robotic manipulation methods with the attention mechanism have recently achieved significant progress in both training efficiency and task performance. However, the inherent redundancy, occlusion, and viewpoint dependency in robotic view images often lead to severe attention drift. To address this challenge, we propose AmpAttention, a novel attention mechanism inspired by differential amplifiers in analog circuits. It aims to suppress attention noise and capture high signal-to-noise ratio signals for more reliable perception. Based on this, we introduce the RVAF model, which integrates task-guided intra-view and inter-view AmpAttention. Compared to previous state-of-the-art methods, RVAF achieves the optimal average success rate across 18 RLBench tasks (249 variations) while reducing training time by 33.3\%. RVAF also demonstrates strong potential in real-world high-precision tasks, exemplified by its ability to pick up a dart

arXiv:2607.02840v1 Announce Type: new Abstract: Vision-Language-Action (VLA) models have shown promising generalization in robotic manipulation, but they still struggle with contact-rich tasks, where minor contact perturbations can cause unrecoverable failures that are hard to detect from vision alone. Since these failures are localized rather than task-level semantic errors, tactile-aware corrective post-training offers an efficient way to improve recovery. However, scaling such supervision through human intervention is costly. Recent works have explored world models to synthesize imagined rollouts for policy improvement, but vision-only world models may produce visually plausible yet contact-inconsistent trajectories. We therefore introduce TACO, a tactile-aware world-model-driven framework for scalable VLA post-training in contact-rich manipulation. Given real robot rollouts, TACO follows a Recognize-Imagine-Label loop with a tactile-aware world model: a unified progress-action mode

arXiv:2607.02827v1 Announce Type: new Abstract: Tactile sensing is central to how robotic systems interact with the real world, yet current solutions face a tradeoff between sensing area and system complexity. This work investigates metallic ultrasound waveguides as distributed tactile sensors fully interrogated from a single proximal transducer. Using cylindrical indenters, we characterized the acoustic response to single and multi-point contacts with varying forces and contact materials. For single point indentation, the applied force was well captured by a linear relationship with the ratio of the reflection to transmission coefficients (F = a * R/T) across all nine tested materials (R2 >= 0.95). The calibration slope, a, correlated strongly with the material's effective contact modulus (log--log Pearson r=-0.98). The reflected energy partition was found to be a load-independent parameter related to the contacting material's properties, enabling material classification independent o

arXiv:2607.02764v3 Announce Type: replace Abstract: Infrastructure maintenance, contact-based inspection, and emergency response can benefit from aerial vehicles that act as a flying human hand with extreme maneuverability, manipulation, and resiliency (MMR): maneuverability to fly in arbitrary orientations to reach remote and tight locations; manipulation to point sensors, turn valves, and press tools at arbitrary orientations; resiliency to maintain accurate motion and force control despite disturbances from arbitrary directions, such as wind, ground effects, and friction. Realizing MMR on aerial vehicles requires not only omnidirectional flight; it also requires (I) vectoring of maximum thrust in any direction, to maximize capacity for contact-force application and disturbance rejection, (II) global stability, to enable control over any orientation/position, and (III) compact, standard designs that build upon platforms such as quadrotors to inherit technological know-how. No current

arXiv:2607.02646v1 Announce Type: new Abstract: We present EVA-Client, an open-source framework for deployment, data collection, and evaluation of trained manipulation policies on real robots. Sitting between a policy server and the physical hardware, EVA-Client unifies the real-robot stages of the policy iteration loop within a single codebase. It makes three contributions. First, a component-decoupled architecture in which robot backends, inference strategies, and transport middlewares form an orthogonal grid: adding a robot or a strategy touches only its own layer. Second, inspectable execution through Debug, Collect, and Eval workflows, with modes ranging from open-loop simulation to continuous real-time control. Third, every evaluation run doubles as a data collection, recording full rollouts in training-ready format alongside exhaustive logs and a side-by-side comparison viewer, so each evaluation feeds the next round of training rather than ending as an unrecorded impression. EV

arXiv:2607.02642v1 Announce Type: new Abstract: Evaluating embodied robot foundation models remains a critical bottleneck; unlike large language models efficiently assessed via digital benchmarks, robotic policies require slow, costly real-world rollouts limited by hardware and human supervision, which has driven interest in world models as surrogate policy evaluators, yet the key properties that make a world model reliable for policy assessment remain poorly understood. This work presents a systematic study of world models for robotic policy evaluation and introduces WMBench, a benchmark constructed from real-robot teleoperation data and matched policy rollouts covering diverse manipulation tasks to enable controlled comparisons across model families, action encodings, rollout horizons, and evaluation metrics. Using WMBench, we analyze 7 video world models, 4 action representation schemes, and over 324,000 simulated policy rollouts paired with real robot executions, further enriching

arXiv:2606.03003v2 Announce Type: replace-cross Abstract: A latent world model built from an equivariant encoder and predictor inherits a provable symmetry of its training loss: when the dynamics carries a group $G$ acting on latents by an orthogonal representation $\rho(g)$, the one-step prediction relMSE is exactly invariant across the whole group, so fitting a restricted slice of orientations mathematically determines it on the entire orbit. The symmetry survives a real Muon/AdamW+EMA+VICReg run -- composed residual $\sim 10^{-6}$ after training, under any optimiser (intrinsic Vector-Neuron/e3nn parametrisation) -- and one-step error is flat across the group (5-seed medians: equivariant $\times 1.00$ vs a higher-capacity non-equivariant baseline $\times 12.7$ in 2D, $\times 17.2$ in 3D), while that baseline fits the slice but breaks out-of-distribution. The flatness is not a synthetic artefact: on real-robot DROID end-effector trajectories the equivariant model stays flat across the

arXiv:2605.17984v2 Announce Type: replace-cross Abstract: Quasi-bimodal objects, such as text, road signs, and barcodes, play a basic yet vital role in daily visual communication. By boiling these down to clear silhouettes, binarization uses a minimal language to convey essential vision cues for maximum downstream efficiency, especially for tasks that require simple geometric, topological reasoning rather than heavy appearance modeling. The catch is that frame-based imaging often struggles on mobile platforms like drones, self-driving cars, and underwater vehicles, in which rapid motion causes severe motion blur and harsh lighting washes out scene details. To overcome these physical limits, neuromorphic vision via event cameras, featuring microsecond time resolution and high dynamic range, steps in as a natural solution. Building upon this event-driven paradigm, we propose a simple yet effective dual-modal approach that harnesses the synergy between frames and events for training-free,

arXiv:2503.24009v3 Announce Type: replace-cross Abstract: Realistic simulation is critical for applications ranging from robotics to animation. Learned simulators have emerged as a possibility to capture real world physics directly from video data, but very often require privileged information such as depth information, particle tracks and hand-engineered features to maintain spatial and temporal consistency. These strong inductive biases or ground truth 3D information help in domains where data is sparse but limit scalability and generalization in data rich regimes. To overcome the key limitations, we propose 3DGSim, a learned 3D simulator that directly learns physical interactions from multi-view RGB videos. 3DGSim unifies 3D scene reconstruction, particle dynamics prediction and video synthesis into an end-to-end trained framework. It adopts MVSplat to learn a latent particle-based representation of 3D scenes, a Point Transformer for particle dynamics, a Temporal Merging module for