News & Research

arXiv:2607.01304v1 Announce Type: new Abstract: ROS 2 (Robot Operating System 2) has emerged as the de facto standard for modern robot software development, with middleware implementations such as the Data Distribution Service (DDS) and Zenoh forming the core infrastructure for distributed robotic communication. Despite their architectural flexibility, these middleware systems exhibit structural limitations, particularly under dynamic and resource-constrained wireless environments. This paper presents a systematic survey of ROS 2 middleware and introduces a conceptual framework to examine its architectural limits through three structural dimensions required by distributed robotic systems, namely Space, Time, and State. We first provide a structured analysis of middleware architecture and operational dynamics, including discovery, data exchange, and state management mechanisms. Building on this foundation, we formalize Time as temporal predictability for control loops, Space as spatial

arXiv:2607.01287v1 Announce Type: new Abstract: Accompanying a group of humans is an essential aspect of developing human-like social cognition in robots. However, human groups typically do not follow fixed formations, which poses significant challenges for robots in maintaining natural companionship behaviors. In this paper, we propose an adaptive group-accompaniment method for social robots based on Vision-Language Models (VLMs), leveraging their semantic reasoning capabilities to infer companion positions, maintain social distances, and understand group dynamics. The members of the group are first detected, and a perceptual module generates visual representations of the interaction group space as input to the VLM, which is then combined with a Model Predictive Path Integral (MPPI) controller to ensure stability and safety. Experimental evaluations across five scenarios show that the proposed method enables robots to accompany the group effectively, demonstrating a 15\% improvement i

arXiv:2607.01281v1 Announce Type: new Abstract: Autonomous landing of unmanned aerial vehicles (UAVs) on wave-disturbed marine platforms remains challenging due to stochastic platform motion, time-varying platform attitude, and uncertain touchdown conditions. Existing model-based methods often require accurate motion prediction and online optimization, while end-to-end learning approaches may suffer from high training complexity and limited interpretability. This paper presents WaveLander, a hierarchical control framework via reinforcement learning (RL) that decouples vertical landing decision-making from low-level flight stabilization. The RL policy maps a compact platform-relative observation to a scalar vertical velocity reference, while a conventional low-level flight controller maintains attitude stability and lateral tracking. This formulation reduces dynamic platform landing to a low-dimensional, timing-aware control problem and enables smooth landing behavior without explicit s

arXiv:2603.22055v2 Announce Type: replace-cross Abstract: Underground mining robots are increasingly modeled for planning, operator training, and digital-twin workflows, where reliable actuator-level kinematics is needed to reduce hazardous in situ trials. Unlike typical open-chain industrial manipulators, representative mining machines are often linear-actuator-driven closed-chain mechanisms with planar four-bar linkages, making reusable kinematic modeling and real-time FK/IK solving challenging. We present \textit{\hl{MineRobot}}, an actuator-centered framework for modeling and solving the kinematics of this representative mechanism class. MineRobot introduces the Mining Robot Description Format (MRDF), a domain-specific representation that parameterizes mining-robot kinematics with native semantics for actuators and loop closures. It then contracts planar four-bar substructures into generalized joints and extracts, for each actuator, an Independent Topologically Equivalent Path (ITE

arXiv:2505.07254v2 Announce Type: replace-cross Abstract: Precise 3D state estimation in multi-object tracking (MOT) is critical for self-driving cars, particularly for objects occluded. Motion modeling in the Kalman filter with a constant motion assumption is widely used in MOT methods, but it neglects the continuous changes in objects' motion caused by traffic in urban environments. Although recent research introduces a multimodel Kalman filter that incorporates multiple motion models, these approaches incur significant computational overhead from the simultaneous processing of multiple models. To this end, this work introduces a motion-dynamics Kalman filter (MD-KF) that overcomes the constant-motion assumption while preserving the singularity of the motion model. MD-KF models the changes in objects' motion over successive measurements as Gaussian distributions, and adaptively adjusts a weighted motion model to account for these variations. MD-KF consistently outperforms constant an

arXiv:2603.25418v2 Announce Type: replace Abstract: Teleoperation for contact-rich manipulation remains challenging, especially when using low-cost, motion-only interfaces that provide no haptic feedback. Virtual reality controllers enable intuitive motion control but do not allow operators to directly perceive or regulate contact forces, limiting task performance. To address this, we propose an augmented reality (AR) visualization of the impedance controller's target pose and its displacement from each robot end effector. This visualization conveys the forces generated by the controller, providing operators with intuitive, real-time feedback without expensive haptic hardware. We evaluate the design in a dual-arm manipulation study with 17 participants who repeatedly reposition a box with and without the AR visualization. Results show that AR visualization reduces completion time by 24% for force-critical lifting tasks, with no significant effect on sliding tasks where precise force co

arXiv:2603.19124v3 Announce Type: replace Abstract: This paper presents the design, modeling, and fabrication of 3D-printed, tendon-actuated continuum robots featuring a flexible, tapered backbone constructed from thermoplastic polyurethane (TPU). Our scalable design incorporates an integrated electronics base housing that enables direct tendon tension control and sensing via actuators and compression load cells. Unlike many continuum robots that are single-purpose and costly, the proposed design prioritizes customizability, rapid assembly, and low cost while enabling high curvature and enhanced distal compliance through geometric tapering, thereby supporting a broad range of compliant robotic inspection and manipulation tasks. We develop a generalized forward kinetostatic model of the tapered backbone based on Cosserat rod theory using a Newtonian approach, extending existing tendon-actuated Cosserat rod formulations to explicitly account for spatially varying backbone cross-sectional

arXiv:2603.17720v2 Announce Type: replace Abstract: Imitation learning is a prominent paradigm for robotic manipulation. However, existing visual imitation methods map 2D image observations directly to 3D action outputs, imposing a 2D-3D mismatch that hinders spatial reasoning and degrades robustness. We present VolumeDP, a policy architecture that restores spatial alignment by explicitly reasoning in 3D. VolumeDP first lifts image features into a Volumetric Representation via cross-attention. It then selects task-relevant voxels with a learnable module and converts them into a compact set of spatial tokens, markedly reducing computation while preserving action-critical geometry. Finally, a multi-token decoder conditions on the entire token set to predict actions, thereby avoiding lossy aggregation that collapses multiple spatial tokens into a single descriptor. VolumeDP achieves a state-of-the-art average success rate of 88.8% on the LIBERO simulation benchmark, outperforming the stro

arXiv:2603.10263v2 Announce Type: replace Abstract: We introduce Distribution Contractive Reinforcement Learning (DICE-RL), a framework that uses reinforcement learning (RL) as a "distribution contraction" operator to refine pretrained generative robot policies. DICE-RL turns a pretrained behavior prior into a high-performing "pro" policy by amplifying high-success behaviors from online feedback. We pretrain a diffusion- or flow-based policy for broad behavioral coverage, then finetune it with a stable, sample-efficient residual off-policy RL framework that combines selective behavior regularization with value-guided action selection. Extensive experiments and analyses show that DICE-RL reliably improves performance with strong stability and sample efficiency. It enables mastery of complex long-horizon manipulation skills directly from high-dimensional pixel inputs, both in simulation and on a real robot. Project website: https://zhanyisun.github.io/dice.rl.2026/.

arXiv:2511.03591v2 Announce Type: replace Abstract: Safe multi-agent motion planning (MAMP) under task-induced constraints is a critical challenge in robotics. Many real-world scenarios require robots to navigate dynamic environments while adhering to manifold constraints imposed by tasks. For example, service robots must carry cups upright while avoiding collisions with humans or other robots. Despite recent advances in decentralized MAMP for high-dimensional systems, incorporating manifold constraints remains difficult. To address this, we propose a manifold-constrained Hamilton-Jacobi reachability (HJR) learning framework for decentralized MAMP. Our method solves HJR problems under manifold constraints to capture task-aware safety conditions, which are then integrated into a decentralized trajectory optimization planner. This enables robots to generate motion plans that are both safe and task-feasible without requiring assumptions about other agents' policies. Our approach generaliz

arXiv:2506.12851v3 Announce Type: replace Abstract: Humanoid robots are promising to acquire various skills by imitating human behaviors. However, existing algorithms are only capable of tracking smooth, low-speed human motions, even with delicate reward and curriculum design. This paper presents a physics-based humanoid control framework, aiming to master highly-dynamic human behaviors such as Kungfu and dancing through multi-steps motion processing and adaptive motion tracking. For motion processing, we design a pipeline to extract, filter out, correct, and retarget motions, while ensuring compliance with physical constraints to the maximum extent. For motion imitation, we formulate a bi-level optimization problem to dynamically adjust the tracking accuracy tolerance based on the current tracking error, creating an adaptive curriculum mechanism. We further construct an asymmetric actor-critic framework for policy training. In experiments, we train whole-body control policies to imita

arXiv:2505.20857v2 Announce Type: replace Abstract: Motion retargeting for specific robot from existing motion datasets is one critical step in transferring motion patterns from human behaviors to and across various robots. However, inconsistencies in topological structure, geometrical parameters as well as joint correspondence make it difficult to handle diverse embodiments with a unified retargeting architecture. In this work, we propose a novel unified graph-conditioned diffusion-based motion generation framework for retargeting reference motions across diverse embodiments. The intrinsic characteristics of heterogeneous embodiments are represented with graph structure that effectively captures topological and geometrical features of different robots. Such a graph-based encoding further allows for knowledge exploitation at the joint level with a customized attention mechanisms developed in this work. For lacking ground truth motions of the desired embodiment, we utilize an energy-bas

arXiv:2607.01008v1 Announce Type: cross Abstract: Short-horizon prediction is essential for electro-optical UAV tracking, especially when the target is small, maneuvering, or intermittently observed. Image center, line-of-sight, and range measurements provide direct constraints on target position, but their constraints on acceleration are weak. As a result, prediction can lag during aggressive maneuvers. This paper proposes an image-domain tilt constrained distributed fusion method for maneuvering UAV tracking. The method uses the apparent roll and pitch of a rotorcraft target in the image as low-level maneuver cues. A weak-prior auto-labeling pipeline first generates oriented bounding box and image-domain tilt labels from synchronized video, gimbal IMU, and UAV IMU data. A YOLO-OBB detector is then trained to provide online target position and tilt measurements. The front-end Python implementation is publicly available at github.com/ShineMinxing/PythonYOLO. In the fusion stage, the UA