News & Research

arXiv:2609.15861v1 Announce Type: new Abstract: Uncrewed Aerial Manipulators (UAMs) extend the capabilities of Uncrewed Aerial Vehicles (UAVs) from perception to physical interaction. Among various aerial interactions, push-and-pull operations are fundamental manipulation primitives that require sustained horizontal forces while maintaining stable flight. In this paper, we propose DuctAM, a compact aerial manipulation platform that enhances horizontal force capability for push-and-pull interactions using two ducted fans integrated along the quadrotor interaction axis. An attitude-force decoupled control scheme enables controllable horizontal forces without requiring large attitude changes. Extensive real-world experiments are conducted to validate the DuctAM. Figure-eight trajectory tracking experiments demonstrate stable flight and accurate motion control in both quad and duct modes. Force-measurement experiments quantify the decoupled longitudinal force capability of DuctAM. Finally,

arXiv:2609.15840v1 Announce Type: new Abstract: Learning chunk-based visuomotor policies for long-horizon robot manipulation remains challenging. Recent action-chunking methods have shown promising performance by predicting temporally extended action sequences. However, their failures are often dominated by prediction errors at a small number of critical timesteps rather than uniformly poor predictions across the entire action chunk, making uniform refinement inefficient and insufficiently targeted. To address this bottleneck, we propose Uncertainty-Guided Refinement (UGR), a sparse refinement framework for chunk-based visuomotor policies. Specifically, UGR follows a coarse-to-refine design: it first predicts a full action chunk, estimates per-step temporal uncertainty from the coarse hidden states, and applies residual correction only to the most uncertain timesteps selected by a binary mask. The uncertainty branch is decoupled from the coarse action predictor, enabling clean attribut

arXiv:2609.15770v1 Announce Type: new Abstract: Light detection and ranging (LiDAR) remains less explored than RGB-D sensing for perceptive legged locomotion, and existing LiDAR-based approaches often rely on explicit mapping. We present JEPLO (Joint-Embedding Predictive learning for legged LOcomotion), a single-stage learning framework for mapping-free, LiDAR-based perceptive locomotion for legged robots. We introduce a proprio-exteroceptive JEPA (PE-JEPA) world model to learn predictive egocentric terrain representations from onboard observations, including raw LiDAR scans. A concurrent JEPA-teacher-student (CJTS) pipeline is further proposed to train a locomotion policy informed by JEPA latent representations in simulation using deep reinforcement learning with a simple reward formulation. The framework achieves successful sim-to-real transfer, enabling omnidirectional traversal of diverse terrains, including long staircases and high boxes, with lightweight onboard computation. Eval

arXiv:2609.15726v1 Announce Type: new Abstract: Tactile sensing provides contact information that can be difficult to infer from vision alone, but tactile hardware for dexterous hands has not converged to a common design. Dexterous hands differ in finger structure, contact surfaces, and sensor layouts, while simulated tactile signals still differ from measurements produced by physical sensors. These factors make it difficult to study visuo-tactile manipulation across diverse dexterous hands within a consistent experimental setting. We present Bench2Dex, a simulation benchmark for visuo-tactile bimanual manipulation across 12 dexterous hands. We adapt existing robot models with a shared simulated tactile interface that converts local contact geometry into image-like tactile observations. The interface provides a consistent observation format across different hand morphologies without attempting to reproduce the output of a specific physical tactile sensor. Bench2Dex includes 26 bimanual

arXiv:2609.15667v1 Announce Type: new Abstract: Agriculture faces many challenges, and robotic systems can play an important role in addressing them by improving the efficiency and sustainability of field operations. Among these challenges, preserving soil health is a critical concern, as vehicle-soil interactions can degrade the soil structure and produce unwanted surface deformation. A key step toward soil-aware robotics is to explicitly account for how vehicle traffic deforms the ground, yet soil state is typically not treated as a variable. We address this gap by proposing a framework to quantify traffic-induced soil deformation and estimate its evolution online from lidar observations. The method relies on a reduced-order parametric model that represents the soil behavior via physically interpretable parameters, yielding a continuously updated and observable representation of soil state. Experiments conducted in different soil conditions demonstrate the ability of the approach to

arXiv:2609.15587v1 Announce Type: new Abstract: Planning in complex environments requires task specifications grounded in representations that capture objects, relations, and affordances; scene graphs meet this need, but their size in large environments hinders efficient planning. While task-aware pruning and hierarchical abstractions have been explored, a general, task-centric formalization of what constitutes a sufficient scene graph for planning remains open. This paper provides such a formalization by modeling planning over scene graphs within an information-spaces framework through the definition of scene graph transition systems and relevant action semantics for navigation and manipulation. We then introduce derived scene graphs via information mappings that merge and prune nodes and induce quotient transition systems augmented with motion primitives to capture higher-level actions over merged graph nodes. Sufficiency is characterized by two conditions: (i) the information mappin

arXiv:2609.15570v1 Announce Type: new Abstract: World Action Models (WAMs) use video generation models to predict future visual dynamics for robotic manipulation, but iterative denoising introduces additional latency for closed-loop control. We empirically find that visual content converges at different rates during denoising. Static background structure forms early, whereas the gripper and manipulated object remain blurry after the first step, with their interaction dynamics emerging only through subsequent denoising. Consequently, naively truncating a multi-step video model to one step preserves scene structure but loses the interaction-centric dynamics most critical for manipulation. To address this issue, we propose DIDO, which distills the converged dynamics of a multi-step video model into a single denoising step. DIDO combines distribution matching distillation with interaction-centric representation guidance. Beyond compressing multi-step generation into one forward pass, DIDO

arXiv:2609.15509v1 Announce Type: new Abstract: Recent advances in robot imitation learning have produced visuomotor policies that predict actions directly from visual observations. Yet visually similar scenes can require different actions as target position, object height, or contact geometry changes. Pretrained RGB features may map these geometrically distinct states to similar policy inputs, while simply adding depth requires the policy to learn RGB-depth correspondence from the same limited demonstrations used to learn control. We introduce StereoPatch, a patch-aligned RGB-depth representation that binds registered metric geometry directly to the RGB patches used for action prediction. On a shared 2-D patch grid, asymmetric cross-attention incorporates depth information into the corresponding RGB features before action decoding. The resulting StereoPatch Tokens provide a geometry-aware visual representation that can condition general visuomotor policies without changing their under

arXiv:2609.15475v1 Announce Type: new Abstract: A robot following language instructions needs its semantic memory to keep naming the same physical object while the SLAM pose graph underneath is optimized, loop-closed and compressed. Maps committing each detection to a world coordinate cannot: a closure moves the anchor it was measured from, or the solver marginalizes that anchor, and the query then selects a different object although both graphs represent the same posterior. P-POSEMEM stores each observation as an immutable event at its birth keyframe, retains the Bayes-tree elimination conditional of every marginalized keyframe, and integrates the semantic likelihood over the reconstructed joint posterior of poses, anchors and identities. Dproj, the total-variation defect between the language-goal distributions of inference-equivalent full and marginalized graphs, measures this directly. Over 40 HM3DSem scenes and 112,000 queries, P-POSEMEM reproduces the full-graph oracle (Dproj = 0)

arXiv:2609.15455v1 Announce Type: new Abstract: Companion robots face everyday situations in which several feasible behaviors may be appropriate, yet different people prefer different responses. We introduce InterSocialBench, a benchmark of 210 domestic scenarios and 18 high-level behaviors, pairing judgments from 100 human participants with 23,520 responses from seven large language models under 16 personality conditions. Each human annotation preserves a preferred action alongside explicitly appropriate and inappropriate candidates. A structured construction pipeline covers behavioral alternatives, competing situational cues, and relevant history and future tasks. Evaluation distinguishes preferred-choice agreement from explicit rejection, using scenario-grouped splits for trainable predictors. Simple frequency and persona-voting baselines illustrate these objectives. Across the tested prompts, model and human behavior distributions differ, and the diversity gap remains after matchin

arXiv:2609.15447v1 Announce Type: new Abstract: Combining aerial thrust with spring-loaded hopping makes monopedal quadcopters promising for locomotion over complex terrain, but heuristic proportional-integral-derivative (PID) tuning limits coordination between active thrust and passive contact dynamics. We present a direct estimated-state-to-motor Proximal Policy Optimization (PPO) policy that commands four motors without an explicit hopping state machine or low-level attitude PID. Its reward combines Energy-Manifold Shaping for mass-normalized vertical-energy tracking and apex-state anchoring with Efficiency Shaping, which uses a history-aware power estimator to penalize general power use, impose an additional airborne-power cost, and penalize airborne near-stationarity. In representative hardware runs, the PPO-based control stack reduced cycle-averaged measured electrical power by 30.7% and mean total normalized thrust by 49.8% relative to the tuned PID-based control stack, while re

arXiv:2609.15399v1 Announce Type: new Abstract: Although aerial-legged robots offer combined agility and efficiency, controlling high-speed hopping under complex hybrid dynamics is challenging. Reinforcement Learning (RL) is promising but prone to energy-inefficient "reward hacking". We propose a Dynamics-Informed RL framework for a monopedal hopping quadcopter. By embedding a target Specific Energy into the reward, we constrain the optimization to a physically viable energy manifold, ensuring stable hopping behaviour. By rewarding the phase-consistent behavior, it can encourage bio-inspired stance-phase impulse. Furthermore, penalizing the electro-mechanical power waste induces the motors generate an efficient impulse. This enables the policy to inject energy strictly during spring restitution without heuristic state machines. MuJoCo simulations validate robust height regulation and forward velocity tracking up to 2.0 m/s despite severe attitude-contact coupling. Ultimately, our appro

arXiv:2609.15362v1 Announce Type: new Abstract: This letter investigates how the parameters of a slope-aware variable-admittance filter influence user preferences in force-based interaction with a robotic guide dog for visually impaired individuals. The proposed system consists of a quadruped robot equipped with a sensor-free rigid handle for physical guidance. The framework combines path following, momentum-based interaction-wrench estimation, and a variable-admittance filter whose stiffness and damping are adapted online from slope information extracted by the robot's depth camera. The adaptation policies are evaluated through high-fidelity simulations and a human-subject study involving blindfolded sighted participants. Multiple strategies are compared using a Taguchi L9 design of experiments. Preliminary main-effect results suggest that increasing stiffness uphill and decreasing it downhill improves both objective and subjective metrics, whereas damping shows no significant main ef

arXiv:2609.15352v1 Announce Type: new Abstract: Ground-truth human joint torque estimation relies on motion capture systems, which suffer from limited outdoor usability and significant deployment expenses. Furthermore, direct scaling of ground-truth joint torques to obtain motor torque commands is not necessarily the optimal strategy. To address the aforementioned limitations, inspired by the human motion generation process, this paper proposes a novel assistance torque estimation method based on the dynamic model. From an optimization perspective, the proposed method directly generates motor-assist torque and lowers the cost of data acquisition. Then, a data-driven assistance torque prediction network is trained to enable accurate real-time prediction under complex outdoor environments. Experimental results demonstrate that optimized (estimated) assistance torque exhibits better phase consistency with gait trajectories and better alignment with task characteristics. Relative to the Ze

arXiv:2609.15276v1 Announce Type: new Abstract: This paper presents a low-clearance hinge joint mechanism based on the 3D printing on sheet fabrication method. This approach simplifies the fabrication of hinge mechanisms and overcomes limitations of conventional origami manufacturing by eliminating the need for adhesives commonly used during assembly, making it suitable for robots at the tens-of-centimeters scale. The advantages and disadvantages of three types of hinge joint mechanisms are compared, and a hinge joint that can be designed with low clearance for various facet thicknesses is selected. Based on the selected hinge joint, the twisting angle and bending force are analyzed, leading to the implementation of a clearance of 0.1 mm. Torsional resistance is experimentally evaluated to measure the torque required for twisting caused by plastic deformation and clearance. The results show that the torque associated with plastic deformation is sufficient to constrain the undesired deg