News & Research

arXiv:2609.11382v1 Announce Type: new Abstract: Aerial robot swarms have the potential to transform time-critical safety, security, and search-and-rescue operations. By coordinating multiple robots, they can rapidly survey disaster sites, map collapsed or GPS-denied environments, and search cluttered areas faster than a single robot, reducing response times and minimizing risks to first responders. Realizing this potential, however, requires robust autonomous swarm navigation, which remains an active research challenge. Progress is further constrained by existing platforms, as commercial drones are often closed-source or lack the onboard computational resources needed for agile, vision-based collective flight. Moreover, developing, deploying, and maintaining software across multiple aerial robots requires significant engineering effort. To address these challenges, we present SwarmNxt, an open-source software platform built on the open-source OmniNxt drone hardware. SwarmNxt provides a

arXiv:2609.11361v1 Announce Type: new Abstract: Reconfigurable robots can change their contact geometry when a fixed body cannot negotiate an obstacle. A variable-geometry truss (VGT) distributes this shape change through a load-bearing structure, but coupling it to a mobile base creates a high-dimensional coordination problem. GeoTrussRover combines an electrically actuated VGT, a wheeled base, and contact-semantic morphology planning and control. We solve one source traversal and extract four contact-semantic primitives that describe coordination among 21 members. Physics-constrained projection adapts them to unseen step heights with the same contact topology. When every phase remains feasible, adaptation does not recompute the complete motion. If one phase violates the new physical constraints, only that phase is recomputed. A full-space QP then tracks the adapted motion and corrects member and wheel errors. For transfer from 0.10m to 0.075m, the method reduces objective-function ev

arXiv:2609.11357v1 Announce Type: new Abstract: Human-to-humanoid retargeting has largely been studied on legged platforms, while comparatively few wheeled-humanoid systems support coupled locomotion and manipulation from general human motion. Building on GMR's configurable general-motion retargeting and BeyondMimic's physically simulated R1 Pro learning framework, we present a reproducible pipeline that converts multi-dataset SMPLX motion into executable loco-manipulation behavior for the Galaxea R1 Pro wheeled humanoid. The robot has a planar three-wheel base, a serial torso, and two arms but no leg joints, so human lower-body motion must be redistributed across base motion and torso posture without sacrificing manipulation-relevant arm geometry. Our pipeline combines canonical body-shape preprocessing, planar-base normalization, morphology-aware differential inverse kinematics, shoulder-rooted hierarchical arm retargeting, and continuous torso substitution for bending and squatting.

arXiv:2609.11308v1 Announce Type: new Abstract: Long-horizon robot manipulation requires memory, but not necessarily inside the action policy. To address such tasks, current agentic systems often combine VLAs with planners and geometric tools, sometimes using additional depth or calibrated geometry. These systems confound attribution: gains may come from richer observations or alternative motor tools, while failures may stem from either the policy or an under-specified language interface. We isolate this question through a deliberately constrained design: less tool breadth, but greater interface bandwidth. 2AM makes a multimodal Agent the sole holder of task memory and a single RGB-based, episodically stateless Action Model the sole executor of task-relevant motion. The Agent compiles interaction history into subtask language and optional 2D grasp, place, and move hints that bind its physical intention at different time scales. To teach this steerability to the VLA, we augment demonstr

arXiv:2609.11270v1 Announce Type: new Abstract: Pretrained generative robot policies learn expressive action priors from demonstrations. However, existing reinforcement learning methods only steer the noisy space but fail to modulate intermediate action representations during the generation process, resulting in performance degradation and inefficiency. To address this limitation, we propose a novel Dual-Latent Space Reinforcement Learning (DLSRL) framework, which complements initial-noise steering with representation-level control inside the frozen generator. Specifically, our actor network predicts two distinct latent variables: an initial-noise latent variable that steers behavior generation, and an action-representation latent variable for intermediate feature modulation. Moreover, this representation latent variable is mapped to adapter features and ingeniously injected into the hidden states of intermediate action tokens via residual connections. Our dual-control design enables d

arXiv:2609.11225v1 Announce Type: new Abstract: Autonomous property inspection requires more than robust robot navigation: a deployable system must connect heterogeneous sensing, reusable autonomy capabilities, multimodal scene understanding, human interaction, and enterprise response within a traceable operational loop. Existing quadruped inspection systems commonly integrate these functions through task-specific interfaces, making contextual coordination, knowledge reuse, and controlled adaptation difficult. This paper presents \textit{Harness Robotic OS} (HROS), a unified embodied-agent runtime, and Argos, its realization for residential-community inspection. HROS organizes the system into robot runtime, embodied autonomy skills, cognitive agent runtime, and interaction and operations planes. A shared context connects physical state with agent reasoning; streaming ASR/TTS supports voice-based mission interaction; hierarchical working, episodic, and semantic memory preserves operatio

arXiv:2609.11079v1 Announce Type: new Abstract: Render--match--PnP relocalization establishes correspondences between query image pixels and 3D map points for camera pose recovery, but their potential to support dense depth estimation is often overlooked. To exploit this geometric information, we present RIDE, which estimates dense metric depth from a robot's RGB stream. Given a metrically scaled 3D Gaussian Splatting (3DGS) model, RIDE combines sparse metric depth observations derived from PnP-RANSAC inlier correspondences with the geometric prior of a pretrained video-depth model. To handle uneven and intermittent observations, it integrates global and local depth correction with temporal memory, supporting depth estimation through short observation gaps after metric scale initialization. Trained on public RGB-D videos, RIDE is evaluated on robot sequences without fine tuning. Experiments show improved depth accuracy and temporal consistency over scale-only calibration, demonstrating

arXiv:2609.11078v1 Announce Type: new Abstract: Robot swarms are increasingly used in applications where accessible interaction with non-expert users is desirable. This paper investigates freehand sketching as an end-user programming interface for specifying robot swarm geometries. Users communicate spatial intent through a drawing, while the swarm autonomously extracts target formation points, constructs a rigid formation graph, assigns robots to formation nodes, and executes distributed formation control with a guarantee against unintended reflected formations. The resulting sketch-to-swarm framework is evaluated through a human study examining the usability of freehand formation specification. Twenty participants generated $42$ geometric shapes, and the interface achieved a mean System Usability Scale score of $84.25$, which conventionally indicates high perceived usability. The results support freehand sketching as an intuitive interaction abstraction for human-swarm collaboration

arXiv:2609.11059v1 Announce Type: new Abstract: Passive mechanical interfaces offer a lightweight alternative to actuated manipulators for quadruped payload carrying, but their impedance directly couples the payload dynamics with the locomotion pattern. This paper analyzes how passive-arm stiffness-damping selection affects payload-carrying locomotion under different gait and payload conditions. We compare damped and underdamped passive-arm impedance configurations in simulation during flat-ground locomotion. For crawl gaits, where the support polygon remains well defined, the results show that underdamped impedance increases passive-joint oscillations and can reduce the ZMP margin with respect to the support polygon. Trot is retained as a dynamic excitation case for the passive arm, but it is not used for direct ZMP-margin stability comparison. The results are summarized in gait-payload-stiffness-damping maps, where ZMP-margin reduction is evaluated for crawl gaits and trot is retaine

arXiv:2609.11043v1 Announce Type: new Abstract: Multi-agent robotic manipulation tasks require coordination among agents to satisfy task-level temporal, logical, and safety constraints. Recently, diffusion policies have been used to perform the task. However, they still suffer from desynchronization, incorrect action ordering, and coordination failures in tasks that require simultaneous or sequential multi-agent interaction. Therefore, LTLDiff is proposed as a framework that combines Finite Linear Temporal Logic (LTLf) specification learning for both the generation of demonstrations and learning via diffusion policies. Each task has a specific LTLf formula that is learned from a set of natural language instructions using a large-scale language model. To enable a fixed-dimensional vector embedding of the learned specification from the language model, LTLf uses an abstract syntax tree representation scheme. This embedding of logic serves as a condition for (i) logic-guided data collectio

arXiv:2609.10918v1 Announce Type: new Abstract: Imitation learning has achieved impressive results in robotic manipulation, yet most existing approaches assume clean backgrounds and lack explicit mechanisms for obstacle-aware motion generation. Extending such policies to cluttered, real-world scenes with unstructured obstacles remains a key generalization challenge. We present ObstaDiff, a decomposed diffusion-policy framework with a lightweight obstacle-aware visual encoder. ObstaDiff extracts a structured target-obstacle-background representation, enabling the downstream alignment policy to generate end-effector trajectories toward a target-centered bottleneck pose while reasoning about surrounding obstacles. We evaluate ObstaDiff on 61 real-robot greenhouse trials per method (366 executions in total). ObstaDiff achieves 75.41% average task success and 8.20% average obstacle collision rate, outperforming representative imitation-learning baselines and improving generalization in clut

arXiv:2609.10915v1 Announce Type: new Abstract: Vision-language-action (VLA) policies leverage pretrained vision-language backbones to achieve strong cross-task generalization. A leading design couples this backbone with a dedicated continuous action head trained via diffusion or flow matching. However, such heads rely on iterative multi-step sampling, for example 10 Euler steps in $\pi_{0.5}$. This creates an inference bottleneck that produces stop-and-go movement in the robot and slower task completion. We introduce IMLE-VLA, which replaces the iterative action head with a single-step conditional generator trained via conditional Implicit Maximum Likelihood Estimation (cIMLE). The cIMLE objective promotes multimodal action coverage, avoiding the mode collapse of naive regression heads while eliminating multi-step sampling entirely. When IMLE-VLA is applied to $\pi_{0.5}$, it increases inference frequency 3.67x (55 Hz vs. 15 Hz), enabling up to 11x higher action throughput. On the 40-

arXiv:2609.10905v1 Announce Type: new Abstract: Planning trajectories for robot manipulators under kinematic equality constraints restricts feasible motions to a measure-zero submanifold of the configuration space, requiring special algorithmic treatment. A promising strategy is parametrizing the set of feasible configurations using analytic inverse kinematics (IK). Bespoke analytic IK functions can be written to be differentiable, a necessary property for gradient-based trajectory optimization. But the vast majority of IK functions are computed by automated meta-solvers like IKFast, and are difficult to modify for differentiability. We present a new approach for computing gradients of analytic IK parameterizations: we leverage the inverse function theorem to recover the desired gradients from the ordinary forward kinematic Jacobian. Furthermore, we present a least-squares domain extension and an optimization-amenable description of the reachability constraint, which preserves gradient

arXiv:2609.10895v1 Announce Type: new Abstract: Reacting to sudden physical hazards (catching a slipping plate, dodging a falling knife) is both a meaningful test of embodied intelligence and a hard requirement for deploying multimodal large language models (MLLMs) as the decision coreof household robots. Existing evaluations, however, probe intuitive physics passively through question answering over videos, or target deliberate, long-horizon tasks such as navigation and rearrangement; none measure whether a model can turn physical understanding into immediate, safety-critical action. We introduce ReactHuman, the first physics-grounded benchmark for human-like reactive decision-making, in which the evaluated MLLM acts as the brain of a simulated humanoid facing sudden household hazards; it spans 17 event families and over 1,000 bit-for-bit reproducible scenes with exact, annotation-free ground truth derived from 240 Hz rigid-body simulation, including adversarial objects whose appearan

arXiv:2609.10844v1 Announce Type: new Abstract: Enabling robots to perform musical instruments with human-level expressivity represents a frontier in bridging the gap between mechanical precision and artistic interpretation. Despite advances in robotic dexterity, replicating the fluid finger transitions and nuanced dynamic control characteristic of human pianists remains a significant challenge. Through a reinforcement learning-based control framework, we demonstrate that a dexterous robotic hand can achieve high-fidelity performance across a diverse piano repertoire. Central to our approach is a graph-based optimization strategy that guides the robot to generate natural pre-press and key-press fingering strategies that closely resemble human movement patterns. To achieve expressive sound production, the control system is coupled with a physics-inspired acoustic model that modulates keypress velocity to accurately reproduce the dynamic variations specified in musical scores. Quantitati