Research Papers

arXiv:2607.10565v1 Announce Type: new Abstract: End-to-end motion planning has emerged as a promising paradigm in autonomous driving, directly mapping raw sensor data to control commands via deep neural networks. Despite its advantages, its large model size hinders deployment in resource-constrained platforms. In this paper, we present BucketKD, a bucket-based knowledge distillation framework that yields compact and safety-aware end-to-end planners. Compared to the state-of-the-art approach, which relies on simplified planning state representations, BucketKD discretizes critical environmental variables into adaptive buckets that capture richer scene semantics while preserving efficiency. In addition, we design a safety-aware waypoint attention mechanism that evaluates each waypoint's risk level by accounting for both obstacle proximity and relative motion through a time-to-collision (TTC) formulation widely used in transportation research. This enables the student model to better retai

arXiv:2607.10553v1 Announce Type: new Abstract: Efficient exploration and target search in large-scale unknown environments remain challenging for aerial robots due to the demands of broad spatial coverage, fine-grained perception, and real-time decision-making. This paper presents SLIDER, a lightweight and memory-efficient framework that avoids reliance on globally dense maps by combining a local sliding map with sparse global history information. A novel observation quality evaluation method is proposed, leveraging historical poses and sensor models to assess point cloud data in real-time, enabling efficient frontier detection. To support scalable and responsive planning, an incremental viewpoint clustering strategy dynamically adapts to local updates, significantly reducing the number of candidate targets and decreasing computational load. A sparse global topological map is incrementally maintained to assist global planning and cost evaluation. Extensive simulations and real-world e

arXiv:2607.10504v1 Announce Type: new Abstract: Generative vision-language-action policies have advanced robot manipulation, but they often exhibit instability under noise, partial observability, and stochastic initial conditions. During extended rollouts, small velocity errors accumulate, degrading execution reliability. Existing diffusion and flow-based policies typically assume homoscedastic residuals and lack explicit uncertainty modeling within action generation, limiting robustness during iterative rollout. We propose SUREFlow, a state-space uncertainty-aware residual flow matching framework built on a Mamba backbone. The method jointly predicts action velocities and input-dependent residual uncertainty, enabling selective refinement of unreliable action dimensions without environment feedback while preserving computational efficiency. On LIBERO, SUREFlow achieves 92.5% average success rate (SR), outperforming the Mamba-based MaIL by 34.2%. On LIBERO-PRO, it attains around 49% SR

arXiv:2607.10374v1 Announce Type: new Abstract: Safe and socially compliant navigation remains a fundamental challenge for autonomous robots operating in human-populated environments. Beyond collision avoidance, robots must anticipate human motion and respect personal space to ensure human comfort. Model Predictive Control (MPC) offers a robust alternative to classical and data-driven methods, although its effectiveness strongly depends on accurate human motion prediction and efficient computation. This paper introduces SFM-NMPC, a Social Force Model-based Non-linear Model Predictive Control framework that embeds human motion prediction directly within the optimization loop. By incorporating the Social Force Model into the dynamic model of surrounding agents, the controller jointly predicts the trajectories of humans and robots over the prediction horizon, thereby enabling socially-aware planning. A tailored set of social cost functions guides the optimization toward human-compliant be

arXiv:2607.10372v1 Announce Type: new Abstract: The transition of autonomous mobile robots from controlled industrial settings to dynamic, human-centric environments, such as manufacturing, logistics, and healthcare, has made their safe and autonomous operation a critical area of research. These sophisticated machines must be capable of perceiving, understanding, and interacting with their surroundings to navigate freely and perform complex tasks. A significant obstacle to achieving this is the lack of comprehensive contextual awareness, which requires a robot to recognize its spatial environment and identify the objects and actors within it. Without this perceptual knowledge, robots struggle to plan adaptive behaviors or engage in meaningful interaction with humans. This thesis presents novel solutions to this challenge by exploring two distinct but complementary research directions. The first direction involves human re-identification and tracking to improve Human-Robot Collaboration

arXiv:2607.10369v1 Announce Type: new Abstract: Flow-matching policies have emerged as an effective policy parameterization for robot learning. They iteratively generate actions from noise, enabling highly expressive modeling of complex and multimodal action distributions. However, prior works observed that scaling these policies with value-gradient reinforcement learning (RL) often leads to training instability. Existing methods attribute this instability to iterative generation and therefore avoid end-to-end value-gradient optimization by sacrificing iterative generation, high expressiveness, or value-gradient optimization. Contrary to prior belief, we show the instability does not stem from iterative generation itself, but from the vanilla sampling strategy originally designed for behavior cloning, which becomes brittle under value-gradient RL. Motivated by this insight, we propose VINE, an RL-oriented sampling method that enables stable end-to-end value-gradient optimization for fl

arXiv:2607.10294v1 Announce Type: new Abstract: Conventional colonoscopy remains limited by patient discomfort and procedural risks, motivating research into compliant robotic alternatives. Eversion robots, which advance via pressure-driven tip growth, eliminate sliding friction against the colon wall and offer a less intrusive approach to traversal. However, no existing design simultaneously satisfies all clinical requirements. This paper benchmarks four recent eversion robot architectures against the key anatomical and clinical constraints of colonoscopy, including colon length, minimum luminal diameter, bending angle, and working-channel needs. We identify the central trade-offs each design reveals, particularly the difficulty of integrating steering and payload delivery without sacrificing the soft, low-friction behaviour that makes eversion robots attractive. We then provide design guidance across material selection, steering strategy, and payload delivery, and highlight open prob

arXiv:2607.10288v1 Announce Type: new Abstract: Autonomous navigation in dense and highly dynamic environments requires both physically feasible control and low-latency replanning. Optimization-based methods such as Model Predictive Control (MPC) explicitly handle robot kinematics and safety constraints, but repeated nonlinear optimization can limit real-time responsiveness. Deterministic behavior-cloning policies enable efficient inference but may fail to represent multimodal avoidance behaviors, whereas diffusion policies capture multimodality at the cost of time-consuming iterative denoising. We propose PIER-Flow (Physics-Informed Efficient Rectified Flow), a lightweight navigation policy for mobile robots. By distilling an MPC expert into a continuous-time Ordinary Differential Equation (ODE), PIER-Flow achieves single-step action generation through parallel latent sampling and lightweight feasibility selection. We introduce a physics-informed training objective to enforce kinemati

arXiv:2607.10180v1 Announce Type: new Abstract: We introduce ActiveFly-Bench, the first benchmark to bridge cyberspace reasoning and physical-world interaction for UAV embodied perception. The benchmark decomposes active perception into three hierarchical tasks: Aerial Embodied Question Answering (Air-EQA), Observation Behavior Planning (OBP), and Fine-grained Language-guided UAV Control (FLUC), explicitly connecting high-level task understanding, behavior planning, and low-level control. The datasets are collected from both real-world and simulated outdoor environments for training and evaluation. We further develop ActiveFly, a closed-loop UAV agent that integrates visual-language reasoning with fine-grained control, and deploy it on a physical UAV platform. Experiments with representative VLMs and VLA models show that current UAV agents still struggle with behavior planning, viewpoint adjustment, and robust task completion in active perception. These results establish ActiveFly-Benc

arXiv:2607.10172v1 Announce Type: new Abstract: Deploying billion-parameter Vision-Language-Action (VLA) models on industrial hardware requires fine-tuning to bridge the embodiment gap. Full Fine-Tuning (FFT) provides maximal plasticity but requires data centre-grade GPUs. We present a systematic study of Low-Rank Adaptation (LoRA) for $\pi_0$, a flow-matching VLA, evaluated on four precision assembly tasks with a UR5e robotic manipulator. Across a sweep of LoRA ranks (r=8 to 256), allocation strategies, and component-freezing ablations, we find no statistically significant advantage of FFT over certain LoRA configurations. Performance saturates at r=32, and uniform allocation across the Vision-Language-Model (VLM) backbone and action expert proves sufficient. Freezing the VLM or restricting the vision encoder to LoRA significantly degrades performance, indicating that embodiment adaptation requires both semantic and visual plasticity. These results suggest that LoRA at r=32 with full

arXiv:2607.10170v1 Announce Type: new Abstract: Communication graph rigidity is a fundamental requirement in many multi robot formation control approaches. However, ensuring and maintaining a rigid communication topology becomes challenging in practice due to limited sensing ranges and dynamic operating conditions. This paper provides a method for achieving an inter robot collision free, rigid time varying communication graph, where communication links are established or broken according to limited sensing ranges, without assuming an initial rigid graph. In addition, the proposed approach guarantees the realization of a rigid graph for heterogeneous nonlinear multi robot systems. A computationally lean, distributed quadratic optimization-based controller is developed for a leader follower architecture, acquiring rigidity based on hierarchical second-order consensus among robots. Follower agents do not require global absolute positions of any agent, including their own. The proposed met

arXiv:2607.10161v1 Announce Type: new Abstract: Robust probabilistic mapping is essential for autonomous robotic systems operating in challenging environments. While traditional sensors fail in adverse conditions such as smoke and fog, millimeter wave (mmWave) radar sensors offer reliable sensing in such conditions. However, creating accurate probabilistic maps from radar data presents significant challenges due to the inherently sparse and noisy characteristics of radio wave measurements and signal processing steps. In an attempt to address these issues, we establish a complete pipeline from raw radar signals to probabilistic occupancy maps, incorporating Synthetic Aperture Radar processing followed by a probabilistic modeling step. We conduct extensive validation across indoor environments, comparing our approach against different signal processing and probabilistic modeling approaches. We also evaluate mapping quality through downstream path planning performance analysis. Furthermor

arXiv:2607.10132v2 Announce Type: replace Abstract: Dynamic loco-manipulation requires legged robots to coordinate whole-body motion while maintaining stable physical interaction with grasped objects under uncertain external forces. While tactile sensing has been widely studied for robotic manipulation, its role in dynamic whole-body control remains largely unexplored. Existing works without tactile feedback commonly grasp firmly rather than regulate the grasp according to the interaction. We propose TAC-LOCO, a tactile-augmented unified reinforcement learning framework that encodes tactile array observations from compliant grippers into a compact latent representation and joins it with proprioception for unified control of the legs, arm, and gripper. With effective grasp stability reward design, the policy learns to simultaneously track body velocity and end-effector trajectories, moderate grasp force, and prevent object slip under both gradual load changes and sudden release events.

arXiv:2607.10037v1 Announce Type: new Abstract: Collaborative decision-making is a fundamental capability in multi-robot systems, such as connected autonomous vehicles. However, perceptual noise and adversarial attacks in collaborators can severely affect decision reliability. Overall, existing methods typically rely on retraining with attack-specific defenses or on restrictive perturbation assumptions to improve resilience, which limits their practicality. In this paper, we propose a novel Resilient Collaborative Decision-Making (RCDM) framework that consists of an attention-based encoder for extracting individual robot perceptual embeddings and an attention-based decoder for fusing collaborator perceptions and making decisions. To improve resilience to corrupted observations, we design a novel plug-and-play reweighting module that down-weights the influence of corrupted inputs by analyzing the consistency of neighborhood points relative to the local structure and assigning smaller we

arXiv:2607.10000v1 Announce Type: new Abstract: We present PinFT, a miniature five-axis capacitive force/torque sensor designed for direct tip-level integration into tweezer-like tools. The sensor employs a compact three-PCB stack with segmented plated through-hole electrodes and a silicone elastomer dielectric, enabling five-degree-of-freedom force and torque sensing ($F_x$, $F_y$, $F_z$, $T_x$, $T_y$) through displacement of a central 2\,mm-diameter stainless steel pin. The fabricated prototype was calibrated using a higher-order polynomial mapping, yielding mean absolute errors of approximately 0.23\,N for forces and 2.5\,mN$\cdot$m for torques, with coefficients of determination ($R^2$) exceeding 0.97 across all axes. To demonstrate practical utility, a 3D-printed tweezer integrating PinFT sensors at both tips was mounted on a parallel-jaw gripper and evaluated across three representative manipulation tasks: grasping a sub-millimeter SMD capacitor, pulling a simulated hair from a s