Research Papers

arXiv:2511.19211v4 Announce Type: replace Abstract: Typically, heuristic/trial-based approaches are used to design soft pneumatic grippers (SPGs). This paper presents a systematic topology optimization framework for developing SPGs. The design-dependent nature of actuating load is modeled using Darcy's law with an added drainage term. A 2D soft arm unit is then optimized as a compliant mechanism under pneumatic loading. To ensure the design is robust and manufacturable, the problem is formulated as a min-max optimization, where output deformations of blueprint and eroded designs are considered. A volume constraint is imposed on the blueprint part, while a strain-energy constraint is enforced on the eroded part. The Method of Moving Asymptotes is employed to solve optimization problems. The optimized 2D part is extruded suitably to generate a 3D unit. Ten such 3D units are assembled to create a gripper arm. Both the optimized 2D unit and the corresponding gripper arm outperform their co

arXiv:2512.19199v2 Announce Type: replace-cross Abstract: The paper establishes generalization bounds for multitask deep neural networks using operator-theoretic techniques. The authors propose a tighter bound than those derived from conventional norm based methods by leveraging small condition numbers in the weight matrices and introducing a tailored Sobolev space as an expanded hypothesis space. This enhanced bound remains valid even in single output settings, outperforming existing Koopman based bounds. The resulting framework maintains key advantages such as flexibility and independence from network width, offering a more precise theoretical understanding of multitask deep learning in the context of kernel methods.

arXiv:2605.22896v1 Announce Type: new Abstract: Vision-Language-Action (VLA) models have emerged as a promising paradigm for robotic manipulation by leveraging pre-trained vision-language representations. However, current VLA training methods suffer from two critical limitations: poor generalization to novel environments and low training efficiency requiring extensive demonstrations. We introduce Agentic-VLA, an agentic training framework that enables VLAs to efficiently adapt online through three key innovations: (1) Adaptive Reward Synthesis, which dynamically generates and adjusts reward functions based on the VLA's current capabilities and task complexity, decomposing complex tasks into learnable sub-goals for curriculum learning; (2) Language-Guided Exploration, where a critic model provides structured guidance for systematic exploration rather than random sampling; and (3) Experience Memory,which stores and retrieves task-relevant policy weights for warm-starting adaptation to si

arXiv:2605.22986v1 Announce Type: new Abstract: Learning reward functions from demonstrations assumes that demonstrations provide adequate supervision over all features -- or task-relevant aspects of behavior. In practice, demonstrations are often imperfect: humans may under-emphasize certain features due to cognitive load or physical difficulty, or the training regime may fail to sufficiently cover all relevant situations. In either case, important features may be underspecified, leading to ambiguity in the learned reward function and misaligned behavior at deployment. We propose a framework that detects such underspecified features and actively solicits targeted corrective demonstrations. Our key insight is that demonstrations implicitly reveal which features are well specified: features that are consistently optimized show little variation across demonstrations, while features that are underspecified vary widely. We leverage this statistical signal to infer which features may have b

arXiv:2605.22991v1 Announce Type: new Abstract: Reactive task-space planners such as Bug2 operate with fixed Cartesian step sizes and are unaware of the manipulator's joint-angle limits. When the Jacobian is poorly conditioned, even small Cartesian steps can demand joint changes that exceed admissible bounds; clipping the joints to their limits causes tracking drift and can prevent goal reaching entirely. We address this by computing, at each planning step, the largest Cartesian hyperrectangle that is \emph{certifiably reachable} under joint displacement bounds. Using a second-order polynomial approximation of the inverse kinematics and the S-procedure, we formulate a small semidefinite program whose solution yields the certified half-width~$\lambda^\star$. An equivalent bisection procedure exploiting the quadratic structure solves the certification in sub-millisecond time. Integrating this certificate with Bug2 yields a planner whose step size adapts to local kinematic conditioning. I

arXiv:2605.23027v1 Announce Type: new Abstract: Recent research has demonstrated the potential of reinforcement learning in effective multi-robot collaboration, particularly in social dilemmas where robots face a trade-off between self-interest and collective benefits. However, environmental factors such as miscommunication and adversarial robots can impact cooperation, making it crucial to explore how multi-robot communication can be manipulated to achieve different outcomes. This paper presents PIMbot, a framework that manipulates outcomes via two complementary levers: (i) incentive manipulation of the reward channel and (ii) policy manipulation of an agent's own actions. An adaptive multi-objective controller balances these levers in an online manner. Our work introduces a novel approach to manipulation in recent multi-agent RL social dilemmas that utilize a unique reward function for incentivization. By utilizing our proposed PIMbot mechanisms, a robot is able to manipulate the soc

arXiv:2605.23100v1 Announce Type: new Abstract: Legged robots carry an IMU, but the inertial solution drifts because consumer-grade IMUs are noisy. However, the feet create intermittent contacts with the environment that can be used to mitigate that drift. This report develops a sequence of increasingly expressive legged robot state estimators that leverage this. In all cases, the floating-base state comprises attitude, position, velocity, and IMU biases. To model foot contacts, we start from the contact-aided invariant EKF of Hartley et al., albeit at a reduced contact update rate. This is then augmented by replacing the measurement update by a small factor graph. Finally, we turn the same factors into a fixed-lag smoother with contact-episode footholds, with and without an evolving IMU bias. To facilitate reproducibility and further research in proprioceptive legged odometry, all four variants are available in GTSAM (Dellaert et. al), and we additionally provide a ROS2-compatible imp

arXiv:2605.23165v1 Announce Type: new Abstract: Autonomous robotic exploration of unknown and hazardous environments, a long-standing challenge, can be significantly improved by leveraging the advanced reasoning of Vision-Language Models (VLMs). We introduce a novel exploration pipeline where a VLM performs high-level strategic decision-making, guiding a conventional low-level robotics control stack. At decision points, the robot generates a multimodal prompt with its current map and visual imagery of potential paths, or frontiers. The VLM analyzes this prompt to select the most promising frontier, replacing simple geometric heuristics with contextual spatial reasoning. This approach, validated in simulation across six indoor environments, improves map coverage by up to 24\% over existing methods. Our pipeline is lightweight, training-free, and easily transferable to any robot with standard sensors and an internet connection.

arXiv:2605.23240v1 Announce Type: new Abstract: This paper investigates continuous-time motion planning under Signal Temporal Logic (STL) specifications. The goal is to generate smooth robot trajectories that satisfy high-level logical and timing requirements while respecting low-level motion constraints. To this end, we propose an efficient framework that combines timed-automata reasoning with graphs of convex sets (GCS). An STL specification is first represented by a timed automaton, which is then coupled with a convex decomposition of the configuration space to form a joint transition system encoding both task progress and region occupancy. Based on this joint transition system, the STL motion-planning problem is reformulated as a shortest-path problem over a GCS, whose solution induces a smooth B\'ezier-spline trajectory satisfying the STL specification, smoothness requirements, and velocity bounds. We establish the soundness of the proposed formulation and analyze its computationa

arXiv:2605.23263v1 Announce Type: new Abstract: Embodied agents, which couple intelligent decision-making with physical actuation in the real world, impose far more stringent and heterogeneous communication requirements than purely software-based agents. While 6G promises sub-millisecond latency, ultra-high reliability, native intelligence, and integrated sensing, systematic studies on how to exploit these capabilities for embodied agent communication remain limited. This article investigates 6G-enabled communication systems for embodied agents from both conceptual and engineering perspectives. First, we review the concept, embodiment value of embodied agents, and clarify their distinctions from disembodied agents. Then, we analyse the symbiotic relationship between embodied agents and 6G networks. We highlight how key 6G enablers can support the stringent requirements of human-robot interaction. Furthermore, we demonstrate the proactive role of embodied agents in bolstering communicat

arXiv:2605.23341v1 Announce Type: new Abstract: Embodied trajectories, such as the executable motion sequences of robotic manipulators, underwater vehicles, and mobile robots, are a fundamental output of embodied AI. Modern generative models often treat them as a dense, monolithic signal generated point by point, fitting an intricate high-dimensional posterior while leaving the data's latent structure unmodeled, the same sample inefficiency long identified by the structured generative model literature. We argue that a compositional latent structure is a natural choice: many embodied tasks share recurring motion fragments that can be made explicit as a finite repertoire of reusable motion primitives, and compositional units naturally align with subtask boundaries to support task decomposition. Existing compositional generators, however, compose in a latent space and rely on post-hoc decoding to relate sampled units to actual trajectory segments. We instead compose directly in the physic

arXiv:2605.23350v1 Announce Type: new Abstract: Autonomous exploration of multi-floor buildings remains challenging for ground robots because conventional 2D and 2.5D maps cannot represent overlapping traversable surfaces such as stairs, ramps, and multiple reachable elevations. This letter presents a multi-floor exploration framework based on an incremental reachable graph. Built as a sparse graph over reachable support surfaces, the graph preserves potentially valid connectivity through tentative graph elements under sparse observations and enables stable, physically reachable frontier detection. To guide exploration beyond the currently mapped floor, we project task-zone priors from an explored floor to initialize a hypothetical graph on the target floor and reconcile it incrementally with incoming observations. A hierarchical planner then jointly reasons over confirmed and hypothetical structures for global guidance. In simulation, the proposed method demonstrates improved explorat

arXiv:2605.23386v1 Announce Type: new Abstract: Agricultural UAV research requires simulators that integrate realistic 3D scenes, high-fidelity vehicle dynamics, and robotics middleware, while remaining practical to deploy across heterogeneous development machines. We present Droneulator, a portable UAV simulator architecture that combines RotorPy for multirotor dynamics with Godot 4 for rendering and sensor generation. Droneulator exposes both PX4-based control and a lightweight WebSocket command path, and publishes synchronised visual and state streams through a Zenoh-based ROS~2-compatible pipeline. This integration enables a single stack to support inspection-oriented data capture, ROS~2/PX4 local planning, and reinforcement learning experiments without modifying the simulator infrastructure. We present quantified validation of the current system across three agricultural UAV workflows: tree-scale image collection for 3D reconstruction with COLMAP, local planning around canopy obst

arXiv:2605.23632v1 Announce Type: new Abstract: We introduce CopFITi, a copula model for probabilistic forecasting of irregular multivariate time series (IMTS). Our model combines the expressivity of normalizing flows for univariate marginals with the consistency and flexibility of a Gaussian Mixture Copula for the joint dependency structure. Our experiments show that copula-based approaches, which decouple the marginals from the joint, yield better marginal models than architectures that directly fit the full joint. With CopFITi, we propose the first IMTS copula that is marginalization-consistent by construction and establish a new state of the art in joint IMTS density modeling.

arXiv:2605.23424v1 Announce Type: cross Abstract: In-network learning (INL) trains distributed neural modules by exchanging latent activations and backpropagated errors over a communication graph. This letter proposes Dijkstra-pruned INL (D-INL), which removes non-tree links by retaining a capacity-aware shortest-path tree rooted at the fusion node. To balance sparsity and predictive information, local routing (or aggregation) is modeled as a finite-rate stochastic gate with rate $R_g=I(Z; T)$. We derive a rate-distortion-generalization bound and validate the method on a reproducible distributed-classification experiment, where D-INL reduces training exchange by $70.4\%$ while preserving accuracy within the standard deviation of dense INL. Adding finite-rate regularization further reduces the estimated latent rate by $45.7\%$ relative to unregularized Dijkstra INL.